Blustream PWR4IEC handleiding
Handleiding
Je bekijkt pagina 33 van 49
PWR4IEC USER MANUAL
Contact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk
33
Panel Lock:
The panel lock function enables / disables the front panel power buttons. The default position for this setting is enabled.
When enabled, the powers buttons can be pressed to the toggle the outlet on or o:
– When the outlet is toggled on, the associated LED will be lit blue
– When the outlet is toggled o, the associated LED will be o
Please note: the mains power switch on the le of the front of the unit cannot be disabled.
Relay Settings:
On the front panel are 5 x relays, with phoenix pin connectors: relays 1-4 for the corresponding outlet, and a fih relay, ‘P’, for the
mains inlet. The relays can operate in one of two modes, allowing for a high or low voltage to act as the trigger:
Dry Contact Mode:
In this mode, the PWR4IEC will only be controlled by the state on the contact relays for 1-4 and P is disabled, as this could conflict
current state of the relays and actual control on GUI, API, and/or front panel.
– Low Voltage to Power ON Outlets:
– Outlet turns ON when a closed circuit is achieved (external switched closed) connecting Outlet(1-4) relay port to 0V-2.5V
or GND or LOW.
– Outlet turns OFF when an open circuit is achieved (external switched opened) disconnecting Outlet(1-4) relay port to
0V-2.5V or GND or LOW.
– Low Voltage to Power OFF Outlets:
– Outlet turns OFF when an open circuit is achieved (external switched opened) disconnecting Outlet(1-4) relay port to
0V-2.5V or GND or LOW.
– Outlet turns ON when a closed circuit is achieved (external switched closed) connecting Outlet(1-4) relay port to 0V-2.5V
or GND or LOW.
Push Button Mode: Default (Recommended)
In this mode, the PWR4IEC has an additional mode of control for each port. The external push button will toggle the state of the
selected Outlet(1-4). In this mode control on GUI, API, and/or Front panel is available for users.
– Toggle by LOW voltage:
– External push button switch will act as a toggle switch for Outlet(1-4) when a closed circuit is achieved connecting to
0V-2.5V or GND or LOW.
– Toggle by HIGH voltage:
– External push button switch will act as a toggle switch for Outlet(1-4) when a closed circuit is achieved connecting to
external voltage 2.6V-12V or HIGH.
Bekijk gratis de handleiding van Blustream PWR4IEC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blustream |
| Model | PWR4IEC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8395 MB |
