Blustream PWR4IEC handleiding
Handleiding
Je bekijkt pagina 13 van 49
PWR4IEC USER MANUAL
Contact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk
13
SNMP (continued)
Enable SNMP V1 options
SNMP GET GET requests will retrieve information from the PWR4IEC’s MIB
SNMP SET SET requests will change information in the PWR4IEC’s MIB
SNMP UDP port SNMP uses UDP port 161 and port 162
sysConact, sysName, and sysLocation can be set to a user defined string (0-255 characters)
Enable SNMP V2C ON / OFF
SNMP v2 public community The default read-only community string is commonly set to “public”
SNMP v2 private community The read-write string is commonly set to “private”
Enable SNMP V3 ON / OFF
SNMP V3 username up to 32 alphanumeric characters (no spaces)
SNMP v3 authorization algorithm MD5, SHA1, SHA2-256, SHA-2-384, SHA2-512
Set new authorization password required when an authorization algorithm has been selected,
enter a case sensitive password using alphanumeric characters
SNMP v3 privacy algorithm DES, AES, AES-128
Set new privacy password required when a privacy algorithm has been selected
enter a case sensitive password using alphanumeric characters
Enable SNMP Trap
An SNMP Trap Receiver captures, displays and logs SNMP Traps. Traps are unrequested notices of events that are sent
immediately by the device to the SNMP manager.
V1 Trap / V2C Trap
SNMP trap receiver 1 The IP address of a trap receiver (V2C & V3 will be populated with this address)
SNMP trap receiver 2 The IP address of an additional trap receiver (V2C & V3 will be populated with this address)
Bekijk gratis de handleiding van Blustream PWR4IEC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blustream |
| Model | PWR4IEC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8395 MB |
