Blustream MX44AVW handleiding
Handleiding
Je bekijkt pagina 27 van 31
MX44AVW USER MANUAL
Contact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk
27
COMMAND ACTION
? Print Help Information
HELP Print Help Information
STATUS Print System Status And Port Status
FWVER Print All So Version
PON Power On, System Run On Normal State
POFF Power O, System Run On Power Save State
REBOOT Set System And Network Reboot
IR ON/OFF Set System IR Control On Or O
KEY ON/OFF Set System KEY Control On Or O
LED xx yy
Set Power LED Light Up Time
xx=PON: When Device Is Powered On
xx=POFF: When Device Is Powered O
yy=OFF: Set Power LED To Always O
yy=15: Set Power LED To Auto Turn O Aer 15sec
yy=30: Set Power LED To Auto Turn O Aer 30sec
yy=60: Set Power LED To Auto Turn O Aer 60sec
yy=ON: Set Power LED To Always On
RSB x Set RS232 Baud Rate To x bps
RESET Reset System To Default Setting
RESET ALL
Reset System And Network To Default Setting
(Should Type “Yes” To Confirm, “No” To Discard)
MODE oo
Set Device mode
oo=[00]: Matrix mode
oo=[01]: VideoWall mode
oo=[02]: Multiview mode
OUT oo ON/OFF Set Output On Or O
OUT oo FR ii
Set Output:oo From Input:ii
oo=[00]: Select All Output Port
oo=[01...04]: Select One Output Port
ii=[01...04]: Select One Input Port
OUT xx BRIGHTNESS
yy
Set Output xx Brightness To yy
xx=[01...04]: Select One Output Port
yy=[0...255]: Brightness Value
OUT xx SATURATION
yy
Set Output xx Saturation To yy
xx=[01...04]: Select One Output Port
yy=[0...255]: Saturation Value
OUT xx CONTRAST yy
Set Output xx Contrast To yy
xx=[01...04]: Select One Output Port
yy=[0...255]: Contrast Value
OUT xx HUE yy
Set Output xx Hue To yy
xx=[01...04]: Select One Output Port
yy=[0...255]: Hue Value
COMMAND ACTION
OUT oo SCALING yy
Set Output Video Mode yy
oo=[00]: Select All Output Port
oo=[01...04]: Select One Output Port
yy=[01]: 4096x2160p60Hz
yy=[02]: 4096x2160p59Hz
yy=[03]: 4096x2160p50Hz
yy=[04]: 4096x2160p30Hz
yy=[05]: 4096x2160p29Hz
yy=[06]: 4096x2160p25Hz
yy=[07]: 4096x2160p24Hz
yy=[08]: 4096x2160p23Hz
yy=[09]: 3840x2160p60Hz(2160p60)
yy=[10]: 3840x2160p59Hz(2160p59)
yy=[11]: 3840x2160p50Hz(2160p50)
yy=[12]: 3840x2160p30Hz(2160p30)
yy=[13]: 3840x2160p29Hz(2160p29)
yy=[14]: 3840x2160p25Hz(2160p25)
yy=[15]: 3840x2160p24Hz(2160p24)
yy=[16]: 3840x2160p23Hz(2160p23)
yy=[17]: 1920x1080p60Hz(1080p60)
yy=[18]: 1920x1080p59Hz(1080p59)
yy=[19]: 1920x1080p50Hz(1080p50)
yy=[20]: 1920x1080p30Hz(1080p30)
yy=[21]: 1280x720p60Hz(720p60)
OUT oo HDCP BYP/
V14/V22
Set HDCP overrider mode To Output ooo
OUT oo NAME name Set Output Name to name
IN oo NAME name Set Input Name to name
AUDIO xx FR yy
Set Audio Output xx From Input yy
xx = 00 : All Outputs
xx = [01-04] : HDMI Output 1 - 4
xx = [05]: Analogue and Optical Audio Output
yy = [01-04] : Audio From HDMI Input 1-4
yy = [05] : Analogue Audio Input
AUDOUT xx mm
Turn Mute On/O On Output xx
mm = On
mm = O
xx = 00 : All Outputs
xx = [01-04] : HDMI Output 1 - 4
xx = [05]: Analogue and Optical Audio Output
AUDIN GAIN vv yy
Set Input: xx Gain To yy
vv=[L, R or LR] This Is Optional. If L Or R Is Not
Specified Then Both Channels Are Adjusted
yy=[-12...40]: Gain Value (dB) (Step=0.5)
EDID xx CP yy
Set Input:xx EDID Copy From Output:yy
xx=00: Select All Input Port
xx=[01...04]: Select One Input Port
yy=[01...04]: Select One Loopout Port
yy=05: Select Output Port
RS-232 Configuration and Telnet Commands (continued)
Bekijk gratis de handleiding van Blustream MX44AVW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blustream |
| Model | MX44AVW |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3661 MB |
