Blustream MX44AVW handleiding
Handleiding
Je bekijkt pagina 26 van 31
MX44AVW USER MANUAL
www.blustream.com.au | www.blustream-us.com | www.blustream.co.uk26
RS-232 Configuration and Telnet Commands
The MX44AVW can be controlled via serial and TCP/IP.
The default RS-232 communication settings are:
Baud rate: 57600
Data bits: 8
Stop bits: 1
Parity bit: none
The following pages list all available serial / IP commands.
Commonly Used Serial Commands
There are several commands that are commonly used for control and testing:
STATUS Status will give feedback on the switcher such as outputs on, type of connection, etc.
PON Power on
POFF Power o
OUTON/OFF Toggling the main output ON or OFF as required
Example: OUTON (This would turn the main output on)
OUT FRyy (yy is the input)
Example: OUT FR04 (This would switch the main output to source input 4)
Common Mistakes
• Carriage return: Some programs do not require the carriage return where as other will not work unless sent directly aer
the string. In the case of some Terminal soware the token <CR> is used to execute a carriage return. Depending on the
program you are using this token maybe dierent. Some other examples that other control systems deploy include \r or 0D
(in hex)
• Spaces: Blustream commands do not require space between commands unless specified. There may be some programs
that require spacing in order to work.
• How the string should look is as follows: OUTON
• How the string may look if spaces are required: OUT{Space}ON
• Baud rate or other serial protocol settings not correct
Bekijk gratis de handleiding van Blustream MX44AVW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blustream |
| Model | MX44AVW |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3661 MB |
