Blustream MX44AVW handleiding
Handleiding
Je bekijkt pagina 11 van 31
MX44AVW USER MANUAL
Contact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk
11
Web-GUI - Video Wall Mode (continued)
Window:
– Select the video wall window to modify. Any changes in the following sections will be applied to selected window
– The window can also be disabled using the ‘Active’ toggle
Aspect (setting applied to selected Video Wall window):
Amends the aspect ratio of the selected window.
– Custom allows the aspect ratio to be manipulated manually, stretching or compressing the window to the ratio set
– 16:10 / 16:9 / 4:3 fixes the aspect to one of the 3 most common aspect ratios used across most media devices
Please note: If a predefined aspect ratio is selected, and the width and height are manually adjusted, when using any the of the
sizing handles, the window will snap back to the selected aspect ratio and lose the custom ratio.
Rotation Mode & Rotation Angle (setting applied to selected Video Wall window):
Each window can operate in one of two modes for rotation:
– In Fixed Angle Rotation, the window can be rotated at 90(degree) intervals. The angle (0, 90, 180, 270) can be set from the
Rotation Angle drop down menu. The rotation handle in the Video Wall render will be disabled
– In User-defined Angle Rotation, the video wall window can be rotation to any angle (0-360). The angle can be set in Rotation
Angle input field, or by using the rotation handle for the selected window in the video wall render
Please note: If any of the video wall windows are in User-defined Angle Rotation mode, the maximum resolution of the Video Wall
output will be limited to 1920x1080p
Position & Size (setting applied to selected Video Wall window):
– To set the position of the selected window, enter the desired location in the X & Y fields. The position coordinates refer to
the top le corner of each window. (0,0) begins at the top le corner of the output render
– To set the size of the selected window, enter the width and height in pixels into the respective fields. When a fixed aspect
ratio is selected for the window, the window will be forced to re-size to maintain the selected aspect ratio
Presets:
– The MX44AVW contains 12 pre-loaded presets that can be switched to by pressing the corresponding preset button
– An additional 8 custom presets can be saved to easily recall settings and switch between multiple configurations. Once
configured, press the ‘Save to Preset’ button to open a sub menu, and then select the desired preset number. The
configuration will be saved to the selected preset number
– The preset icon will change depending on the matrix configuration, allowing for easy identification of presets
Audio:
– All four HDMI outputs can be set to play audio from the same source device. It does not have to match the video wall input
source
– It can also be set to follow or to play external audio through the phoenix connector port
– Select the desired audio input from the drop down menu to embed into the output
Resolution:
– Controls the resolution for the output window
– Select the desired resolution from the drop down menu
Please note: The output may display black bars depending on the output signal (i.e: Aspect Ratio)
Bekijk gratis de handleiding van Blustream MX44AVW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blustream |
| Model | MX44AVW |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3661 MB |
