Blustream HDBaseT HEX18GARC-KIT handleiding

Niet gecategoriseerd

Blustream

7 pagina's

PDF beschikbaar

Handleiding

HEX18GARC-KIT QUICK REFERENCE GUIDE

www.blustream.com.au | www.blustream-us.com | www.blustream.co.uk

Understanding the HDBaseT™ Signal Status Lights

Blustream HDBaseT™ extender solutions include status LED indicators on both the Transmitter and Receiver products to show all

connections are active and to help diagnose possible problems with the HDBaseT™ link.

Understanding the Status Lights:

Receiver:

• The HDMI status indicator light will be o when there is no connection with a display / sink

• The HDMI status indicator light will be on when there is an active connection with a display

• The orange HDBaseT™ link light will be o when there is no CAT cable / active HDBaseT™ connection on the RJ45 HDBaseT™ output

• The orange HDBaseT™ link light will blink if there is an unstable connection between the Transmitter and Receiver

• The orange HDBaseT™ link light will be lit when a CAT cable is connected to the HDBaseT™ RJ45 output on the Transmitter

and an active connection is achieved with the Receiver

• The green HDBaseT™ HDCP light will be o when no video signal is received

• The green HDBaseT™ HDCP light will flash when there is video signal without HDCP being received

• The green HDBaseT™ HDCP light will be on when there is video signal with HDCP being received

• The power link light will be o when no power is connected to the receiver, or to the connected Transmitter unit

• The power link light will be on when power is connected directly to the receiver or is being received from the Transmitter unit

Transmitter:

• The HDMI status indicator light will be o when there is no connection with a source device

• The HDMI status indicator will be on when there is an active connection with a source device

• The orange HDBaseT™ link light will be o when there is no CAT cable / active HDBaseT™ connection on the RJ45 HDBaseT™ output

• The orange HDBaseT™ link light will blink if there is an unstable connection between the Transmitter and Receiver

• The orange HDBaseT™ link light will be lit when a CAT cable is connected to the HDBaseT™ RJ45 output on the Transmitter

and an active connection is achieved with the Receiver

• The green HDBaseT™ HDCP light will be o when no video signal is transmitted

• The green HDBaseT™ HDCP light will flash when there is video signal without HDCP being transmitted

• The green HDBaseT™ HDCP light will be on when there is video signal with HDCP being transmitted

• The power link light will be o when no power is connected to the Transmitter, or to the connected Receiver unit

• The power link light will be on when power is connected directly to the Transmitter or is being received from the Receiver unit

RJ45 Wiring - T568B

It is important that the interconnecting CAT cable between the

Blustream HDBaseT™ products is terminated using the correct

RJ45 pin configuration. The link CAT6A cable MUST be a ‘straight’

(pin-to-pin) cable and it is advised that this is wired to the T568B

wiring standard as this format is less prone to EMI (Electro-Magnetic

Interference).

When installing CAT cable for HDBaseT

™ it is advised that the best

possible CAT cable quality is used without ANY connections in the

cable between the RJ45 plugs.

HDMI distribution over the new HDBaseT

™ VS3000 chipset will ONLY

work if used with CAT6A standard cable, or above, for extended

distances due to the 16Gbps HDBaseT™ link required. The distance

capabilities of this technology is significantly reduced over CAT5e or

CAT6 cabling because of the increase in data being sent.

Blustream recommends using U/FTP cable for HDBaseT

™ VS3000

installations, especially when running over longer distances, in areas

of high EMI, or for 4K signal distribution.

Terminating the Interconnecting HDBaseT™ CAT Cable

Bekijk gratis de handleiding van Blustream HDBaseT HEX18GARC-KIT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.