Blustream HDBaseT HEX18GARC-KIT handleiding

Niet gecategoriseerd

Blustream

7 pagina's

PDF beschikbaar

Handleiding

HEX18GARC-KIT QUICK REFERENCE GUIDE

www.blustream.com.au | www.blustream-us.com | www.blustream.co.uk

The Transmitter features an 8-pin DIP switch on the front panel.

The switches allow for configuration of various functions of the Transmitter as follows:

DIP switch 1: Specify between 5V IR or 12V IR equipment in use. Blustream IR equipment supplied is 5V. DIP switch

pointing UP for 5V IR equipment. DIP switch pointing DOWN for 12V IR equipment.

DIP switch 2: Specify between USB Host or USB Device mode. DIP switch pointing UP if the unit is connected to the

HOST. DIP switch pointing DOWN if connected to DEVICES. Please note, a Host device can only be connected to one

end of the HDBaseT™ link.

DIP switch 3-4: This switch allows for the selection of the RS-232 port configuration.

See adjacent image:

DIP switch 5-8: This switch allows you to specify an EDID to handshake

with the source device. See adjacent image. The EDID Soware

Management setting will allow for an EDID setting to be chosen via an

RS-232 API command (see full manual for API commands - download

from the Blustream website).

TX Config Switches

RX Config Switches

The Receiver features an 8-pin DIP switch on the front panel.

The switches allow for configuration of various functions of the Receiver as follows:

DIP switch 1: Specify between 5V IR or 12V IR equipment in use. Blustream IR equipment supplied is 5V. DIP switch

pointing UP for 5V IR equipment. DIP switch pointing DOWN for 12V IR equipment.

DIP switch 2: Specify between USB Host or USB Device mode. DIP switch pointing UP if the unit is connected to

DEVICES. DIP switch pointing DOWN if connected to the HOST. Please note, a Host device can only be connected to one

end of the HDBaseT™ link.

DIP switch 3-4: This switch allows you to select the RS-232 port configuration.

See adjacent image:

DIP switch 5: Enable or disable bi-directional CEC pass-through from a display device to a source device. DIP switch

pointing UP for CEC Pass-through. DIP switch pointing DOWN for CEC blocking.

DIP switch 6: Select eARC audio via the HDMI connection or ARC audio via the Optical S/PDIF connection of the

Receiver. DIP switch pointing UP for HDMI eARC (HDMI ARC on TV to HDMI on TX). DIP switch pointing DOWN for Optical

S/PDIF (Optical in from TV to Optical on TX).

DIP switch 7-8: Reserved for future use.

Bekijk gratis de handleiding van Blustream HDBaseT HEX18GARC-KIT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.