Blustream Dante DA22OPT handleiding
Handleiding
Je bekijkt pagina 2 van 4
DA22OPT QUICK REFERENCE GUIDE
02
www.blustream.com.au | www.blustream-us.com | www.blustream.co.uk
Dante Controller soware is required in order to setup and configure the DA22OPT as well as control your Dante
network. Audinate provide extensive training videos and documentation on their website. This can be found here:
http://www.audinate.com/products/soware/dante-controller
Upon connecting your DA22OPT to a compatible network, the Dante Controller soware should automatically
discover the device. The DA22OPT will appear in the Dante Controller with a name denoted with “DA22OPT”. On the
“Routing” screen you can create audio routing between Dante transmitters and receivers in your system.
Please ensure your PC is on the same network as your Dante devices. Dante is not able to transmit over WiFi and it is
recommended to hardwire into the Dante network. Having multiple network devices enabled can also confuse the
Dante Controller soware so it is recommended to disable WiFi during configuration.
It is also possible to change the settings of the DA22OPT under the “Device Info” screen in the Dante Controller
soware. To do so, select the “Device Config” menu.
Here we can adjust the sample rate and the encoding bit rate of the DA22OPT. Please note that Dante products can
only transmit or receive audio from other Dante products that are set up with the same sample rate. A mismatch in
sample rate may stop audio from transmitting.
Under the “Device Config” screen we can also adjust the latency of the DA22OPT from 2, 3, 4, 5 or 10 milliseconds.
Dante Controller
Bekijk gratis de handleiding van Blustream Dante DA22OPT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blustream |
| Model | Dante DA22OPT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 857 MB |
