Blustream Dante DA22OPT handleiding
Handleiding
Je bekijkt pagina 1 van 4
DA22OPT QUICK REFERENCE GUIDE
01
Contact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk
Our DA22OPT has been designed to both encode 2ch optical S/PDIF audio to a Dante®
digital signal, and decode a Dante® digital signal to 2ch optical S/PDIF audio. The DA22OPT
is a plug & play device that is powered using PoE (Power Over Ethernet). The DA22OPT also
supports AES67 RTP audio transport.
Introduction
DA22OPT
Quick Reference Guide
• Encodes 2ch optical S/PDIF audio to a Dante® digital signal
• Decodes a 2ch Dante® digital signal to optical S/PDIF audio
• Supports: 44.1, 48, 88.2 & 96 KHz sample rates @ 16, 24 & 32 Bit
• Configurable Dante® device latency (supports 2, 3, 4, 5 or 10ms configurable using Dante® Controller)
• +6dB / -24dB input sensitivity and output gain control adjustment
• Supports AES67 RTP audio transport
• Features Class 0 802.3af PoE for powering of product from any PoE switch
• Local 12v power supply input for when network switch does not support PoE*
* PS121PH power supply sold separately
FEATURES:
Connections:
1 DC Input - Connect to +12VDC power supply (not supplied) if device is not powered via a PoE switch
2 Dante® Audio Input/Output - RJ45 socket connects Dante® network and powers device via PoE
3 Optical S/PDIF Digital Input - 2ch optical digital audio input to Dante®
4 Optical S/PDIF Digital Output - 2ch optical digital audio output from Dante®
5 Reset Switch - Press and hold to reset device
Front Panel
1
Rear Panel
4
Side Panel
3 52
Bekijk gratis de handleiding van Blustream Dante DA22OPT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blustream |
| Model | Dante DA22OPT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 857 MB |
