Blustream BLUARC handleiding
Handleiding
Je bekijkt pagina 12 van 23
BLUARC USER MANUAL
www.blustream.com.au | www.blustream-us.com | www.blustream.co.uk12
Bluetooth Receiver (continued)
Force Pairing Mode
Turning on Force Pairing mode will change the behavior of the pair button:
– When Force Pairing Mode is enabled, pressing the pair button will disconnect the current device and put the unit in pairing
mode
– When Force Pairing Mode is disabled, the existing Bluetooth source must be disconnected before another source can be
connected to the BLUARC
Manual Disconnect
– Sets how long to press and hold the pair button to force disconnect all Bluetooth devices. When set to O, this feature is
disabled
Bluetooth Source
– The current Bluetooth source device name will be displayed here
Bluetooth Transmitter
First Priority
Select which codec type will be prioritized when transmitting to a Bluetooth device.
BLUARC supports Bluetooth 5.0 which includes aptX, aptX Low Latency (AptX-LL) and aptX High Definition (aptX-HD). AptX Low
Latency mode is oen used when listening to TV audio to improve lip-sync delay. AptX High Definition mode is oen used when
listening to high quality audio content.
Auto Connection
When enabled, the BLUARC will automatically pair to 1-2 Bluetooth devices in pairing mode with the strongest signal.
When disabled, the BLUARC requires manual selection of the device to be connected to.
Paired Devices
Displays a list of the currently paired Bluetooth devices (max 8). The device name and audio codec type will be shown.
Please note: When connecting two Bluetooth audio devices, the Bluetooth audio codec will be forced to SBC mode. If the
BLUARC returns to a single Bluetooth connection, it will re-handshake and establish the best audio codec possible. This may
result in an audio loss of several seconds as the Bluetooth module reboots.
To unpair a Bluetooth device, please press the delete icon on the WebGUI or use API commands.
Available Devices
Available devices will show all local Bluetooth devices discovered aer searching. To connect to an available Bluetooth device,
select it from the list and it will automatically move to paired devices once paired.
EDID Setting:
The EDID for HDMI Output 1 can be modified from the dropdown menu.
A list of available EDIDs can be found under the EDID Management section of this manual.
Load EDID to User Memory:
It is possible to upload custom EDID .bin files to the BLUARC if a specific EDID is not listed within the standard formats. A custom
EDID file can be generated from a third party EDID generation tool, and uploaded using the Browse and Upload buttons. There
are 2 x custom EDID slots available.
Once a file has been uploaded, it can be selected by using the corresponding USER EDID option.
Bekijk gratis de handleiding van Blustream BLUARC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blustream |
| Model | BLUARC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2772 MB |
