Bluetti Handsfree 2 handleiding
Handleiding
Je bekijkt pagina 15 van 32
7.3 Car Charging
Connect the Handsfree 2 to the vehicle's 12V / 24V cigarette lighter port via the car
charging cable. Once fully charged, the Handsfree 2 automatically stops charging to
prevent overcharging and shuts down after one minute of inactivity. It can charge at a
maximum of 96W with a 12V port and 192W with a 24V port.
Note: Make sure your vehicle meets the following conditions for charging:
•
The vehicle is capable of supplying power.
•
The vehicle's engine is running during the charging process.
7.4 Generator Charging
Connect the Handsfree 2 to a generator via the AC charging cable. Once fully charged, the
Handsfree 2 automatically stops charging to prevent overcharging and shuts down after
one minute of inactivity. It takes approximately 2 hours to reach a full charge at an
ambient temperature of 25°C (77°F) if the generator output is stable.
Note:
• Make sure your generator delivers the AC output with charging voltage and frequency
that meet Handsfree 2's specifications.
• If the total power demand of your connected devices exceeds the generator's output
capacity, please turn on the Grid Self-adaption Mode to ensure a seamless charging
experience.
• To switch charging voltage and frequency, and enable the Grid Self-adaption Mode,
please refer to Handsfree 2 BLUETTI App User Manual.
Notice:
The Handsfree 2 has a low-voltage disconnect function designed to protect your
vehicle's battery during charging. When the car battery is low, the unit will automatically
stop charging to prevent over-discharging and potential damage to the battery.
JUST POWER ON 15
Bekijk gratis de handleiding van Bluetti Handsfree 2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bluetti |
| Model | Handsfree 2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2563 MB |
