BlueBuilt BBRVMSW01 handleiding
Handleiding
Je bekijkt pagina 11 van 64
20 21
3.3.4
INSTALLATION UNDER A CONVECTOR /
OTHER HEATING TYPES
1. Remove the magnets from the fan and place them in the slots at the
bottom of the fan according to the figure below.
2. Place the fan under the convector. e installation of multiple fans
follows in the same way.
3. To connect the thermostat cable, the sensor and/or connect several
fans, go to sections 3.4, 3.5, 3.6.
3.4
INSTALLING THE TEMPERATURE SENSOR
Place the magnetic temperature sensor at the radiator, near the hot
water supply (where the radiator first heats up). Insert the sensor
connector into one of the four fan ports.
e installation of one sensor is sufficient for connecting multiple
fans. In this case, make sure you connect the sensor to a radiator that
heats up first.
NOTE!
EN
EN
Bekijk gratis de handleiding van BlueBuilt BBRVMSW01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BlueBuilt |
| Model | BBRVMSW01 |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 4744 MB |