Blodgett BLCT-6-6E handleiding
Handleiding
Je bekijkt pagina 7 van 37
5
Installation
Oven Location and Leveling
The well planned and proper placement of your oven will
result in long term operator convenience and satisfactory
performance.
Certain minimum clearances must be maintained between
the oven and any combustible or non-combustible con
MINIMUM REQUIRED CLEARANCES
Left Right (control side) Back
Low Temperature Environment
2” (50mm) 2” (50mm) 2” (50mm)
High Temperature Environment*
2” (50mm) 16” (400mm) 2” (50mm)
* Includes heat sources (fryers, hot plates, etc) placed on
the control side of the combi
NOTE: For servicing, Blodgett recommends maintaining
at least 16” (400 mm) between the control side
and walls or non moveable equipment.
NOTE: If temperatures are too high, a safety shutdown
may occur.
Failure to comply may invalidate the oven warranty.
To ensure that the oven functions correctly when installed,
it should be placed upright and level (horizontally). This is
measured at the front and side edge of the roof. The oven
can be levelled using the adjusting screws on the stand or
on the legs of table models. The height of the oven should
also be adjusted to t the trolley for rack.
Bekijk gratis de handleiding van Blodgett BLCT-6-6E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blodgett |
| Model | BLCT-6-6E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6277 MB |
