Blizzard Outpost Ranger RGBALC handleiding
Handleiding
Je bekijkt pagina 18 van 24
Page 18
Outpost™ Ranger RGBALC - Rev. A © 2024 Blizzard Lighting, LLC
Using the IR Remote Control
To use the IR remote, rst enable IR control from the OLED menu by navigating to Set > IR Remote and
selecting Enabled or Disabled.
The remote control is simple to use. It oers much of the same
functionality of the control panel, with the addition of quick
access shortcut buttons.
ON + OFF - Double-tap ON to activate the remote and tap OFF
to deactivate.
R/G/B/A/L/C - Pressing any of these buttons sets the xture
to static color mode for color mixing. Use + to increase and - to
decrease the intensity of the selected color.
FULL - Sets all values (R, G, B, A, L, C, DIM, or SPEED) to
maximum.
CLEAR - Resets all values (R, G, B, A, L, C, DIM, or SPEED)
to 0.
STROBE - Cycles through various strobe speeds and types.
AUTO - Cycles through the available auto modes.
CUSTOM COLOR - Cycles through 10 custom colors set on the xture.
CUSTOM CHASE - Cycles through the 3 custom chases set on the xture.
DIM - Adjusts the xture’s overall intensity. Use + to increase and - to decrease the intensity.
SPEED - Adjusts the auto mode speed. Use + to increase and - to decrease the speed.
Bekijk gratis de handleiding van Blizzard Outpost Ranger RGBALC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blizzard |
| Model | Outpost Ranger RGBALC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2695 MB |
