Blizzard Outpost Ranger RGBALC handleiding

Niet gecategoriseerd

Blizzard

24 pagina's

PDF beschikbaar

Handleiding

Page 17

Using the Intelion™ Battery System

This xture oers our proprietary Intelion™ Lithium-Ion internal battery system which allows you the

exibility to operate your xture without AC power.

To charge the battery, simply plug the xture into a power source. The battery will

charge weather the xture is powered on or o. It will even charge while in use!

The built-in microprocessor of the battery system controls the charge and overall

battery health, so all you need to do is plug and play.

The home screen of the OLED display shows the battery power level indicator which displays the approxi-

mate amount of power remaining in the battery. When charging, the charge status LED on the right side of

the OLED display will illuminate in RED, then turn GREEN when the charge is complete.

Power Output Mode

Depending on the needs of any given application, you can select either High, Medium, or Low (battery

saver mode), which allows the xture to run for a longer time at lower output.

1. Navigate the menu to reach SET, and then PWR Output, and press <ENTER>.

2. Use the <UP/DOWN> buttons to select High (100%), Medium (75%), or Low (50%).

3. Press <ENTER> to conrm the setting.

Battery Runtime

• Full brightness: ≥ 2.5 hours

• Single color: ≥ 13 hours

• 2 colors: ≥ 6 hours

Note: Use of dierent colors, fades, chases, strobe eects, and environmental factors including ambient

temperature will all impact battery life. A full charge is obtained after charging for at least 3.5 hours. The

xture will automatically stop charging when the battery is in optimal condition.

Bekijk gratis de handleiding van Blizzard Outpost Ranger RGBALC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.