Blizzard Outpost Ranger RGBALC handleiding

Niet gecategoriseerd

Blizzard

24 pagina's

PDF beschikbaar

Handleiding

Page 14

Custom Programs

Allows users to create up to 3 customizable, 25 scene programs that are directly accessible via the control

panel and also in DMX mode.

Creating A Custom Program:

1.) Use <MENU> and <UP/DOWN> to navigate to Program, then press <ENTER>.

2.) Highlight Chase 1, Chase 2, or Chase 3, and press <ENTER>.

3.) Now you can edit Scene 1 by adding any of its 5 built-in programs (Auto 1-5), and adjust

its speed (Auto Speed 0-255), and also set the duration (in seconds) before moving on to the

next scene (Time 0-255). You can also add a fade in eect to the start of this scene (Wait

0-255), and/or strobe (Strobe 0-255). Finally, if you want to use this scene in your program,

be sure to enable it (USE: YES/NO).

4.) Repeat to create up to 25 scenes for each of the 3 programs.

Red Intensity (0-255) Cyan Intensity (0-255) Wait (0-255, fade in fast to slow)

Green Intensity (0-255) Strobe (0-255, slow - fast) Use (No/Yes) Use scene in program?

Blue Intensity (0-255) Auto 1-5 (auto programs)

IMPORTANT:

If USE is set to NO, or TIME is set

to 0, the scene will not run!

Amber Intensity (0-255) Auto Speed (0-255, fast - slow)

Lime Intensity (0-255) Time (0-255, scene time in seconds)

Running A Custom Program:

1.) To view your newly created lighting masterpiece, use the <MENU> and <UP/DOWN>

buttons to navigate to Auto, and press <ENTER>.

2.) Use the <UP/DOWN> buttons to highlight Chase 1, Chase 2, or Chase 3 and press

<ENTER>. These are directly accessible from the built-in program channel in DMX mode.

Dimming Mode Settings

Allows users to set the xture to use 1 of 4 (x2) dimming curve settings for smoother (and slower)

dimming capabilities. In the control panel menu, there are two settings for each curve that are

distinguishable from one another by the trailing (S).

DMX% DMX% DMX% DMX%

Output

Linear, Linear (S) Square, Square (S)

Linear Curve Square Law Inverse Square Law S-Curve

*The curve settings with the trailing (S) adds a bit more delay to the curve for a smoother eect.

1.) Use the <MENU> and <UP/DOWN> buttons to navigate to Set and press <ENTER>, then

<UP/DOWN> buttons again to scroll to Curves, and press the <ENTER> button.

2.) Now use the <UP/DOWN> buttons to highlight either Linear, Square, Inv Sq, S-Curve,

Linear (S), Square (S), Inv Sq (S), or S-Curve (S), then press <ENTER>.

Inv Sq, Inv Sq (S) S-Curve, S-Curve (S)

Bekijk gratis de handleiding van Blizzard Outpost Ranger RGBALC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.