Handleiding
Je bekijkt pagina 19 van 21
BLZ-SSRF20-4.3/BLZ-GDBEV20-4.5
19
Care and Maintenance
Do not use boiling water to melt any frost, because it
may damage the plastic parts. In addition, never use a
sharp or metallic instrument to remove frost as it may
damage the cooling system and will void the warranty.
We recommend using a plastic scraper. To removed any
ice if necessary.
(A) Cleaning Your Unit:
Turn off the fridge, unplug the unit, and remove the
contents, shelf, and tray.
Wash the inside surfaces with a warm water and baking
soda solution. The solution should be about 2 tablespoons
of baking soda to a quart of water.
Wash the shelf and tray with a mild detergent solution.
The outside of the unit should be cleaned with mild
detergent and warm water.
Squeeze excess water out of the sponge or cloth before
cleaning the area of the controls, or any electrical parts.
Wash the outside cabinet with warm water and mild liquid
detergent. Rinse well and wipe dry with a clean soft cloth.
(B) Power Failure:
Most power failures are corrected within a few hours
and should not affect the temperature of your unit if
you minimize the number of times the door is opened.
If the power is going to be off for a longer period of
time, you need to take the proper steps to protect your
contents.
(C) Vacation Time:
Short vacations: Leave the unit operating during
vacations of less than three weeks.
Long vacations: If the appliance will not be used for
several months, remove all content and unplug the
power cord. Clean and dry the interior thoroughly. To
prevent odor and mold growth, leave the door open
slightly: blocking it open if necessary.
(D) Moving Your Unit:
• Remove all contents.
• Securely tape down all loose items inside your unit.
•
Turn the leveling legs up to the base to avoid damage.
• Tape or a bungee cord the door shut.
•
Be sure the unit stays secure in the upright position
during transportation. Also protect the outside of
unit with a blanket, or similar item.
(E) Energy Saving Tips:
•
The unit should be located in the coolest area of the
room, away from heat producing appliances, and out
of the direct sunlight.
•
Let hot items cool to room temperature before
placing in the unit. Overloading the unit forces the
compressor to run longer.
•
Wipe containers dry before placing them in the unit.
This cuts down on frost build-up inside the unit.
• Unit storage bin should not be lined with aluminum
foil, wax paper, or paper toweling.
•
Liners interfere with cold air circulation, making the
unit less efficient.
•
Organize and label contents to reduce door openings
and extended searches. Remove as many items as
needed at one time, and close the door as soon as
possible.
Bekijk gratis de handleiding van Blaze BLZ-GDBEV20-4.5, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blaze |
| Model | BLZ-GDBEV20-4.5 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 2858 MB |
