Handleiding
Je bekijkt pagina 15 van 54
TIPS AND TROUBLESHOOTING
If the Fireplace Will Not Stay Lit (Cont.)
2. Make sure the thermocouple and igniter pin
are correctly positioned.
Thermocouple - The thermocouple tip should be
located close to the burner, aligned with a
burner nozzle so that flames contact it directly.
Make sure the flames are making contact with
the thermocouple tip.
Damaged Thermocouple
If the igniter housing and the thermocouple tip are clear of debris and the flame is clearly
contacting the tip of the thermocouple, but the fireplace will still not stay lit, the thermocouple
may be damaged. Look beneath the fireplace and find the copper thermocouple wire coming
out of the back of the valve. Examine the length of it for any signs of damage. Sharp bends,
kinks or damage can cause the thermocouple to not function correctly. If you find damage
to the thermocouple contact Blaze Customer Service at 1-866-976-9510 for a replacement.
Igniter Pin - The igniter pin is where the spark is generated to ignite your fireplace. Make
sure you can see this sparking when the igniter button is pushed. If you do not see a spark
please contact Blaze Customer Service at 1-866-976-9510.
Other Common Problems
If you continue to have problems with your fireplace please
contact Blaze Customer Service at 1-866-976-9510.
Igniter Housing
Burn Nozzle
Make sure the area
under the housing is
clear of debris.
Thermocouple
Igniter Pin
15
Clogged or Obstructed Burner
It is common for bugs, especially spiders, to make webs or nests inside of burner tubes.
If it seems like you are getting low or no gas flow, visually check all openings in the
burner for signs of clogs. If you see anything clogging the burner try using a pipe clean-
ing brush and compressed air to remove the debris.
High Winds
High winds may cause the flame to blow out. Do not operate your fireplace in high wind
conditions.
Out of Gas
Verify that the shut-o valve is open.
Bekijk gratis de handleiding van Blaze BLZ-38-FBOWL-NG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blaze |
| Model | BLZ-38-FBOWL-NG |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 5866 MB |
