Handleiding
Je bekijkt pagina 14 van 54
14
TIPS AND TROUBLESHOOTING
If the Fireplace Will Not Ignite
+
-
Back of
Electronic
Igniter Box
Electrode
Wire
1.
2. If you still do not hear a clicking sound or see a spark in the igniter
box, look under the fireplace and make sure that the electrode
wire is correctly inserted into the back of the electronic igniter box.
While inspecting the electrode wire, make sure that it is not cut or
broken in any place. If the wire has been damaged contact Blaze
Customer Service at 1-866-976-9510 for a replacement.
If the Fireplace Will Not Stay Lit
If the fireplace lights, but will not stay lit, or remains lit only for a brief time, please check the following:
1. Make sure that the igniter housing is unobstructed. Clear away any filler material or debris on the
housing and make sure there is nothing between the igniter pin and the thermocouple.
Igniter Pin
You should see this
spark when pushing
the igniter button.
Thermocouple
Make sure flame from the
pilot is contacting this.
Igniter housing removed for visibility
Leave opening between
nozzle and igniter housing
Igniter Housing
Burner Nozzle
Thermocouple
Igniter Pin
If the igniter system is working correctly, you should hear a
clicking sound while the igniter button is being pushed and you
should see a spark inside the igniter housing. If you do not see
the spark or hear a clicking sound, please check the following.
Make sure the battery is not dead and that it is installed correctly,
with the positive (+) side facing out.
Bekijk gratis de handleiding van Blaze BLZ-38-FBOWL-NG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blaze |
| Model | BLZ-38-FBOWL-NG |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 5866 MB |
