Handleiding
Je bekijkt pagina 26 van 76
26
What to do if... Possible reasons Solutions
The control panel is
switched o, the appliance
does not work.
The appliance may be in On / Stand-by
mode.
There may be an appliance power supply
problem.
Turn the appliance on pressing the On/Stand-by button. Check that:
• there is not a power outage;
• the plug is properly inserted in the power socket and the mains
double-pole switch (if present) is in the correct position (i.e. allows
the appliance to be powered);
• the household electrical system protection devices are ecient;
• the power cable is not damaged.
The inside light does not
work.
The light may need to be replace. Models with LED lights: contact the authorised Technical Assistance
Service.
The appliance may be in On / Stand-by
mode.
Turn the appliance on by briey pressing the button (see On/Stand-
by function).
The temperature inside the
compartments is not low
enough.
There could be various causes (see
“Solutions”).
Check that:
• the doors close properly;
• the appliance is not installed near a heat source;
• the set temperature is adequate;
• the circulation of air through the ventilation grilles on the base of
the appliance is not obstructed.
There is water on the
bottom of the refrigerator
compartment.
The defrost water drain is blocked. Clean the defrosting water drain (see section “Cleaning and
Maintenance").
The front edge of the
appliance, at the door striker
seal, is hot.
This is not a defect. It prevents
condensation from forming.
No solution is necessary.
Door open alarm indicator
and Alarm indicators blink,
the acoustical alarm is
activated.
Door open alarm The Fridge door
remained open for more than 2 minutes
Close the door or press the Stop Alarm to mute the acoustical alarm.
The freezer temperature
display blinks, the acoustical
alarm is activated and the
Alarm Indicator blinks
Blackout alarm
Inside the Freezer the temperature is not
adequate
Press the Stop Alarm button to stop the acoustical alarm; the freezer
temperature display continues blinking and the Alarm Indicator
remains on until the adeguate temperature in the freezer is restored.
The red
icon is lit up
(without ashing), a sound
signal is activated and the
freezer temperature display
is ashing.
Freezer compartment temperature
alarm
The freezer compartment temperature
alarm indicates that the compartment
is not at the optimum temperature. This
may occur: when using for the rst time,
after defrosting and/ or cleaning, when
freezing large quantities of food or when
the door to the freezer does not close
completely.
To turn o the sound signal, briey press the “Turn o sound alarm”
button (the temperature display will stop ashing). When the
optimum temperature conditions have been reached, the red icon will
automatically turn o. If the freezer compartment temperature alarm
continues, contact the Authorised Technical Assistance Service.
TROUBLESHOOTING
When contacting our
Service Centre, please
state the codes provided
on your product's
identification plate.
SUPPORT
Bekijk gratis de handleiding van Blaupunkt 5CC284FD0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blaupunkt |
| Model | 5CC284FD0 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 9454 MB |
