Blackstar Polar 2 handleiding
Handleiding
Je bekijkt pagina 16 van 27
16
POLAR CONTROL – Details
The Polar Software App is designed to enhance the functionality of your Polar
Audio Interface, providing control over monitoring levels, mixing, and routing.
This section will guide you through each feature of the software, explaining how
to use them eectively.
Channels
Like most traditional audio mixers, Polar Control has multiple
channels, each with their own individual pan control, level fader, level
meter, decibel value box, mute, solo, and stereo link button.
The Channel Name indicates the function of each channel, for
example, Channel 1, Channel 2, Playback 1L/2R, and Virtual 3/4.
The channel name is automatically assigned based on the input or
output conguration and cannot be manually changed.
Direct Input Monitor
Before going into further detail of each
channel’s functions, it’s helpful to
understand what the Direct Input Monitor button does, and how to use it.
Enabling the Direct Input Monitor button allows you to directly hear the signal
coming into Polar’s preamps (Input 1 and 2 on your Polar Interface).
Typically, using software monitoring in your DAW introduces a small amount
latency. While usually minimal, this latency becomes more noticeable as your
session becomes more demanding (e.g., with many plugins or high track
counts), increasing the load on your computer.
With Direct Input Monitor, you can monitor the signal straight from the inputs
of your Polar 2 with near-zero latency, which can be crucial for monitoring live
vocal performances and more.
Disabling Direct Input Monitor will mute Channel 1 and 2 on Polar Control.
Level Fader
Each channel on Polar Control features a Level Fader that adjusts
the channel’s volume level.
Click and drag, or scroll the fader up or down to increase
or decrease the volume. The dB Value Box will reect your
adjustments. Double-clicking the fader snaps the level to -6.0 dB.
IMPORTANT: When using Direct Input Monitor, you’ll almost always want to disable software
monitoring in your DAW.
If you’re monitoring live vocals that sound slightly doubled, or if you hear an unintended guitar
DI signal, check to make sure you don’t have software monitoring in your DAW and Direct
Input Monitor on Polar Control enabled at the same time.
IMPORTANT:
Fader vs. Preamp Gain: The Level Fader does not control Polar’s preamp control or the
preamp’s gain. It only adjusts the monitoring level of the input. The preamp gain can only be
set using the Gain Control on your Polar 2 Interface.
What This Means: Adjusting the Level Fader will change how loud the signal sounds in your
headphones or monitors but will not aect the actual recording level of the input signal.
Contents Page
Bekijk gratis de handleiding van Blackstar Polar 2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blackstar |
| Model | Polar 2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6005 MB |
