Blackmagic Design SmartView 4K G3 handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485/ 485

Afdrukken

Je bekijkt pagina 6 van 485

Plugging in Video Sources

SmartView and SmartScope monitors feature regular BNC connectors to connect to SDI

equipment including switchers, cameras, capture cards, decks and disk recorders.

Getting a Picture

Displaying your video is easy! Simply power the unit and connect your video source to an SDI

input. Once powered and connected, your video should be immediately visible. SD, HD and

2K signals are automatically detected by the SDI input and loop through output connections.

SmartView 4K G3 and SmartScope Duo 4K also detects Ultra HD.

When no video is received by the unit, the backlight turns off, saving power until the next valid

signal is received.

To view ST 2110 IP video on SmartView 4K G3, connect using the 10G Ethernet port or using an

optional optical fiber SFP module.

INPUT DISP

H/V

DELAY

BLUE

ON LY

3D

LUT 1

3D

LUT 2

H

MARK

V

MARK

ZOOM PEAK

USE ONLY 250V FUSES

Daisy Chaining Monitors

Each SmartView and SmartScope monitor has its own independent SDI input as well as a loop

through output so you can chain multiple monitors together to display the same input signal:

1 Power on unit 1. Connect a video source to an SDI input. The video should immediately

be visible.

2 Power on unit 2. Connect an SDI cable from a loop output of unit 1 to an SDI input on unit 2.

There is no limit to the amount of units you can chain.

If you are waveform monitoring using SmartScope Duo 4K, you’ll probably want to loop the

Monitor 1 output to Monitor 2 so both displays use the same input signal.

Now you have video displayed, you can adjust monitor settings, or select scopes on

SmartScope Duo 4K using the Blackmagic SmartView Setup software, which you can also use

to load 3D LUTs on Blackmagic SmartView 4K G3.

SmartScope 4KDuo

SmartView Duo SmartScope Duo 4K

6Getting Started

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485/ 485

Bekijk gratis de handleiding van Blackmagic Design SmartView 4K G3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Caratteristiche Prodotto

Andere merken in Monitor