Black Box HG-2 handleiding
Handleiding
Je bekijkt pagina 15 van 21
CALIBRATION
HG-2
CALIBRATION
Guide / Instructions
The HG-2 contains potentially deadly voltage and calibration should be performed
only by a qualified professional
The HG-2 was designed to last a lifetime but tubes don’t. No two tubes are exactly the same
and they change slightly over time so it is occasionally necessary to re-calibrate the unit for
optimal results. We suggest performing this calibration any time you change tubes or if the
unit appears to be drifting from its normal response. This usually appears as a drifting
imbalance in the left/right matching.
You will need:
- Phillips screwdriver
- Small jewelers flat head screwdriver or trimmer tool
- Signal generator (inside your DAW is fine)
- A standard set of meters with numerical readout in 10ths of a db (inside your DAW is fine)
- A pair of surgical gloves (optional but recommended to reduce the risk of electric shock)
IMPORTANT: Calibration should be done in the order laid out
WARNING!
When do I need to calibrate by HG-2?
Bekijk gratis de handleiding van Black Box HG-2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Black Box |
| Model | HG-2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1785 MB |
