Bixolon SRP-S300II handleiding
Handleiding
Je bekijkt pagina 22 van 50
SRP-S300II
Ver. 1.00
- 22 -
3-2 Turn on the Power
1) Connect the power cord to the printer’s power port. Then, press the power switch on
the side of the printer to turn it on.
- Be sure to turn off the printer and connect or disconnect the cable.
- Only use a power supply provided by BIXOLON. BIXOLON shall
bear no responsibility for damage caused by using a third-party
power supply.
- Check the power supply’s label to check its electronic specs.
- When removing the power supply, make sure you have a firm
grasp of the plug terminal of the power jack and the printer
and pull horizontally.
- When connecting or disconnecting power, make sure to remove
the power supply from the power outlet before removing.
- Pay attention to the direction in which you insert the power jack.
- Do not connect a voltage out of the specifications of the power
supply. It can cause damage to the product or a fire.
Power Port
Power Cord
Power Switch
Bekijk gratis de handleiding van Bixolon SRP-S300II, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bixolon |
| Model | SRP-S300II |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6954 MB |