BirdDog P4K handleiding
Handleiding
Je bekijkt pagina 51 van 68
47
VISCA over IP Control
With VISCA over IP, you can control the camera using the VISCA protocol on a controller equipped with IP
communication capabilities via LAN.
VISCA over IP communication specications:
• Interface: RJ-45 10 / 100 / 1000 Mbps
• Interface protocol: IPv4
• Transport protocol: UDP
• IP address: 192.168.100.100 By default
• Port: 52381
Controlling via VISCA over IP
1. Connect the network port on the camera to the network switch.
2. Set the IP address and other network information appropriately to communicate on your network.
3. Connect the VISCA over IP compatible controller to the network.
4. Congure the controller to access the camera’s IP address and VISCA over the IP port.
5. The IP port within on your control MUST be set to 52381 to communicate with the camera.
6. Select VISCA protocol on your IP control device.
HDMI Video Signal
3G-SDI Video Signal
VISCA Over IP ControlPoE Power
Bekijk gratis de handleiding van BirdDog P4K, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BirdDog |
| Model | P4K |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 8904 MB |
