Biltema 84-0058 handleiding
Handleiding
Je bekijkt pagina 10 van 24
Art. 84-0058
10
© 2024-10-17 Biltema Nordic Services AB
NO
lugg. Høy effekt for gulv og tepper med kort lugg. Lav
effekt er standardmodus som er forhåndsvalgt hver
gang støvsugeren slås på.
Munnstykker
▋
Name of each part
1. Electric floor brush 2. Floor brush release butt on
3. Conductive tube 4. Conductive tube release button
5. HEPA 6. Cyclone
7. Dust bucket 8. Dust removal button
9. Dust bucket release button 10. Main frame
11. Gear adjustment button 12. Switch butt on
13. Handle 14. Battery p ack release button
15. Battery p ack 16. Charging socket
17. Hanger 18. Expansion screw
19. Floor brush motor 20. Adapter
21. Long flat suction 22. Combination suction
Gulvmunnstykke: Til gulv og tepper.
Fugemunnstykke: Til trange steder og hjørner.
▋
Name of each part
1. Electric floor brush 2. Floor brush release button
3. Conductive tube 4. Conductive tube release button
5. HEPA 6. Cyclone
7. Dust bucket 8. Dust removal button
9. Dust bucket release button 10. Main frame
11. Gear adjustment button 12. Switch button
13. Handle 14. Batter y pack release b utton
15. Batter y pack 16. Charging socket
17. Hanger 18. Expansion screw
19. Floor brush motor 20. Adapter
21. Long flat suction 22. Combination suction
Kombinasjonsmunnstykke: Til sofaer, møbler med
mer.
Tømming
Støvsugeren er poseløs. Tøm støvsugeren ved å
åpne luken til støvbeholderen og helle ut støvet.
9. VEDLIKEHOLD
Rengjøring av fi lteret
ADVARSEL!
• Fjern alltid batteriet før rengjøring.
• • Støvsugeren og ladeadapteren må ikke
senkes ned i vann.
1. Løsne batteriet ved å trykke på knappen. Ta bat-
teriet ut av støvsugeren.
2. Løsne oppsamleren ved å trykke på knappen for å
løsne den.
3. Ta ut lteret.
▋Cleaning and replacing parts
·Pour ash for daily use
Press the conductive tube release button, take off the host, and then press the
bottom cover release button of the dust cup to open the bottom cover to pour the
ash (recommendation: pour the ash in time after each use).
·
Dust cup cleaning
a) Press the conductive tube release button, remove the host, and then press the
dust cup release button to separate the dust cup from the motor assembly, and then
press th e bottom cover release button of the dust cup to open the bottom cover to
pour dust.
b) Take out the filtered HEPA and take out the cyclone cone.
c) Filter HEPA with clean water and add a small amount of water to clean it an d put it
in the container for rinsing. Be careful not to rub HEPA vigorously, so as not to
damage the structure of the filtered HEPA and affect the filtering effect. Please place
the cleaned filtered HEPA in a ventilated place and dry it before using it again. .
(Figure below)
d) The dust buc
ket, dust bucket bottom cover, and cyclone separation cone can be
directly rinsed with tap water and can be used after drying.
e) After pouring the ash, close the bottom cover of the dust cup, and then install the
dust cup and the motor assembly.
·Electric floor brush cleaning
1. Roll the left side slide button on the reverse side of the floor brush to the outside,
and lift the slide button locking blo ck. (As shown below)
2. Take out the roller brush from the slot and clean it up (not w
ashable).
3. After cleaning, assemble in the reverse order o f disassembly, and reset the roller
brush cover.
——Caution: After the roller brush is used for a long time, its roller bristles may be
entangled with lo ng flocs such as hair, so it needs to be cleaned in time so that t he
vacuum cleaner can work more effectively.
4. Skyll lteret. OBS! Filteret må ikke monteres igjen
før det er helt tørt.
5. Monter lteret i oppsamleren, og monter oppsam-
leren i støvsugeren.
Rengjøre børsten
1. Løsne munnstykket fra røret ved å trykke inn
knappen på røret og trekke røret oppover.
2. Løsne rullen fra munnstykket ved å låse opp sper-
ren på undersiden av børsten.
▋
Cleaning and replacing parts
·Pour ash for daily use
Press the conductive tube release button, take off the host, and then press the
bottom cover release button of the dust cup to open the bottom cover to pour the
ash (recommendation: pour the ash in time after each use).
·
Dust cup cleaning
a) Press the conductive tube release button, remove the host, and then press the
dust cup release button to separate the dust cup from the motor assembly, and then
press the bottom cover release button of the dust cup to open the bottom cover to
pour dust.
b) Take out the filtered HEPA and take out the cyclone cone.
c) Filter HEPA with clean water and add a small amount of water to clean it and put it
in the container for rinsing. Be careful not to rub HEPA vigorously, so as not to
damage the structure of the filtered HEPA and affect the filtering effect. Please place
the cleaned filtered HEPA in a ventilated place and dry it before using it again. .
(Figure below)
d) The dust buc
ket, dust bucket bottom cover, and cyclone separation cone can be
directly rinsed with tap water and can be used after drying.
e) After pouring the ash, close the bottom cover of the dust cup, and then install the
dust cup and the motor assembly.
·Electric floor brush cleaning
1. Roll the left side slide button on the reverse side of the floor brush to the outside,
and lift the slide button locking block. (As shown below)
2. Take out the roller brush from the slot and clean it up (not w
ashable).
3. After cleaning, assemble in the reverse order of disassembly, and reset the roller
brus h c over.
——Caution: After the roller brush is used for a long time, its roller bristles may be
entangled with long flocs such as hair, so it needs to be cleaned in time so that the
vacuum cleaner can work more effectively.
3. Løft bort låsen og rullen.
4. Rengjør rullen. Rullen skal ikke skylles i vann.
5. Monter rullen igjen på samme måte som du fjernet
den.
10. ELEKTRISK AVFALL
Elektriske og elektroniske produkter, inkludert alle
typer batterier, skal leveres til gjenvinning. (I samsvar
med direktiv 2012/19/EU og 2006/66/EF.)
LI-ION-BATTERI
Dette produktet inneholder et li-ion-batteri. Batteriet
må ikke svelges, åpnes, knuses, eksponeres for åpen
amme eller utsettes for høye temperaturer.
Bekijk gratis de handleiding van Biltema 84-0058, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Biltema |
| Model | 84-0058 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 3444 MB |