Big Ass Fans es6 handleiding
Handleiding
Je bekijkt pagina 18 van 68
REV. G | 04/15/202414
Slide the airfoils into the slots on the sides of the motor unit as shown (Fig. 13.3). Install
each airfoil on the opposite side of the fan from the previous airfoil to prevent the fan
from tilting. Make sure all airfoils are fully seated in the slots and that the numbered
sticker on each airfoil matches the corresponding number on the bottom of the fan. Do
NOT tighten the six recessed hex bolts until all airfoils are inserted.
Fig. 13.3
Use the provided T-handle hex key to tighten the six recessed hex bolts above each
number on the bottom of the fan according to the numbered sequence. Do NOT
tighten or loosen the six Phillips head screws below each number. Give each hex
bolt three full turns with the hex key before moving to the next bolt in the sequence.
Continue giving each hex bolt three turns in the numbered sequence until all six bolts
are fully tightened and the yellow tabs next to numbers 1 and 5 are fl ush with the tab
openings (Fig. 13.4).
Fig. 13.4
Airfoil
x3
Bekijk gratis de handleiding van Big Ass Fans es6, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Big Ass Fans |
| Model | es6 |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 7400 MB |
