Beurer HK 43 handleiding
Handleiding
Je bekijkt pagina 11 van 66
11
•
The electrical and magnetic fields
emitted by this device may interfere
with the function of your pacemaker.
However, they are still well below
the limits: electrical field strength:
max. 5000 V/m, magnetic field
strength: max. 80A/m, magnetic flux
density: max. 0.1millitesla. Please
therefore consult your doctor and
the manufacturer of your pacemaker
before using this device.
•
Do not pull, twist or make sharp
bends in the cables.
•
If the cable and control of the device
are not positioned properly, there
may be arisk of becoming entangled
in, being strangled by, tripping
over, or stepping on the cable and
control. The user must ensure that
excess lengths of cable, and cables
in general, are safely routed.
•
Check this device frequently for
signs of wear and tear or damage.
If any such signs are evident, if the
device has been used incorrectly or
if it no longer heats up, it must be
checked by the manufacturer before
being switched on again.
•
Under no circumstances should you
open or repair the device (including
the accessories) yourself, as
faultless functionality can no longer
be guaranteed thereafter. Failure to
observe will invalidate the guarantee.
•
If the mains connection cable of
this device is damaged, it must be
disposed of. If it cannot be removed,
the device must be disposed of.
•
Do not expose control and cables to
direct sunlight.
•
When this device is switched on:
‐
sharp-edged objects must not be
placed on it,
‐
heat sources such as hot-water
bottles or similar must not be
placed on it.
•
The electronic components in the
control warm up when the device is
in use. For this reason, the control
must never be covered or placed on
the heating element when it is in use.
•
Allow the device to cool down before
storing it away. Failure to observe this
may result in damage to the device.
•
To avoid severe creasing in the
device, do not place any objects
on top of it while it is being stored.
Otherwise the device may get
damaged.
•
It is essential to observe the
information relating to the following
chapters: Operation, Cleaning and
maintenance, Storage.
•
If you should have any questions
about using our devices, please
contact our Customer Services
department.
4. INTENDED USE
CAUTION
This device is only designed to warm up the human body.
5. DEVICE DESCRIPTION
The associated drawings are shown on page 3.
1
Power plug
2
Control
3
ON-OFF button
4
Button for setting temperature
5
Illuminated display for temperature settings
6
Plug-in coupling
7
Heating element
Bekijk gratis de handleiding van Beurer HK 43, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Beurer |
| Model | HK 43 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7489 MB |
