Bertazzoni PRO96L2EROT handleiding
Handleiding
Je bekijkt pagina 8 van 40
8
Follow the instructions below to change the oven burner
nozzle (model 90x60
single oven):
- Remove the oven level (Fig.5).
- Loosen the screw V and pull out the burner from the support being careful not to
damage the ignition plug and the thermocouple (Fig. 6).
- Un
screw the nozzle R using a 10 mm spanner and replace it with the nozzle
needed for the new type of gas accordingly.
Fig 5 Fig 6
Follow the instructions below to change the oven burner nozzle (model 60x60
single oven):
Remove the oven level (Fig.7).
- Loosen the screw V and pull out the burner from the support being careful not to
damage the ignition plug and the thermocouple (Fig.7
).
- Un
screw the nozzle R (Fig.8) using a 10 mm spanner and replace it with the
nozzle needed for the new type of gas accordingly.
Fig 7 Fig 8
OVEN BURNER ADJUSTMENT O
NLY MODEL 60X60
Only model 60x60 1)Primary air adjustment:
Oven burner adjustment: follow the instructions below to adjust the primary air for
the over burner:
1)
R
emove the oven bottom
.
2) L
oosen the screw P and adjust the position X of the Venturi cone
(Fig.9)
acc
ording to the measurements.
Fig 9
Burner primary air regulation (indicative)
B
URNER
Type of gas Oven (mm)
M6
Natural G20 fully open
Butane G30 fully open
Propane G31 fully open
Bekijk gratis de handleiding van Bertazzoni PRO96L2EROT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bertazzoni |
| Model | PRO96L2EROT |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4815 MB |
