Bertazzoni P604I1M30NP handleiding
Handleiding
Je bekijkt pagina 49 van 140
INSTALLATION
FLUSH-MOUNTED INSTALLATION
The hob can be flush-mounted only on natural stone
(granite, marble), solid wood and tiled worktops. For
worktops made of other materials, contact the
manufacturer to check whether they are suitable for flush-
mounting a hob.
Check the flatness of the hob only after it has been fitted.
After installing the hob in the niche, spray heat-resistant
silicone sealant (at least 160℃) into the gap between the
hob and the worktop.
The recommended height for applying the seal is indicated
in the drawing.
Fig. 6
T S U V
Hob 60 cm 594 mm 524 mm
5 mm 5 mm
Hob 78 cm 784 mm 524 mm 5 mm 5 mm
FIXING THE HOB
To prevent accidental infiltration of liquid into the unit below,
the appliance is equipped with a special seal.
1) After cleaning the surface, spread the sealant along the
lower edge of the top where the hob is built-in.
2) Glue it 2 mm from the edge of the outer glass or the
decorative frame.
Fig. 7
3) Fit the hob into the opening in the unit.
NOTE
The seal must also be inserted for flush-
mounted installations.
T
S
V
U
2 mm
2 mm
49
Bekijk gratis de handleiding van Bertazzoni P604I1M30NP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bertazzoni |
| Model | P604I1M30NP |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 11542 MB |
