Bertazzoni P604I1M30NP handleiding
Handleiding
Je bekijkt pagina 48 van 140
INSTALLATION
INSTALLATION OVER A BUILT-IN OVEN
If installed over an oven, space must be left between the
bottom of the hob and the top of the installed product to
allow for ventilation of the entire compartment (see figure).
The oven must be equipped with a cooling device. The
manufacturer shall bear no liability in the event of the hob
being installed in combination with an oven from another
manufacturer.
Fig. 3
INSTALLATION OVER A COMPARTMENT OR
DRAWERS
The clearance between the oven and the kitchen units or
other installed appliances must be enough to ensure
sufficient ventilation and air discharge.
The internal width of the unit must be at least equal to the
internal width of the cut-out in the worktop so that, once
embedded, the hob is freely accessible from underneath
and the lower casing can be removed for maintenance. If
the hob is not freely accessible from below after installation,
the seal on the kitchen worktop must be removed so that
the hob can be dismantled (once this has been done, the
seal must be put back in place).
Fig. 4
Fig. 5
NOTE
To further optimise the product's
performance, a front discharge for the
cooling air can be provided in the unit
min 20 mm
min 50 mm
min 20 mm
min 50 mm
min 70 mm
min 50 mm
min 70 mm
min 50 mm
48
Bekijk gratis de handleiding van Bertazzoni P604I1M30NP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bertazzoni |
| Model | P604I1M30NP |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 11542 MB |
