Bernette b38 Yaya Han Edition Handleiding (70 Pagina's)

Handleiding

28

Straight Stitch sewing

Stitch pattern: Mode 1 : 1

Mode 2 : 01

Thread tension: 2 - 6

Presser foot: Zigzag foot

• Sewing from the edge of thick fabric

The black button on the zigzag foot locks the foot in the hori-

zontal position.

This is helpful when starting to sew from the far edge of thick fab-

rics or sewing across a hem.

Lower the needle into the fabric at the point where you wish to

start sewing.

Lower the foot while pushing in the black button .

The foot is locked in the horizontal position to avoid slipping.

The button is released automatically after sewing a few stitches.

Black button

Thick fabrics

• Starting to sew

Raise presser foot and position the fabric next to a seam guide

line on the stitch plate (5/8˝ (1.6 cm) is most common). Lower the

needle to the point where you want to start. Lower the presser

foot and pull the threads toward the back. Start the machine.

Gently guide the fabric along a seam guide line letting the fabric

feed naturally.

• Finishing sewing

To fasten the ends of a seam, press the reverse sewing button

and sew several Reverse sewing stitches. Press the thread

cutter button to trim threads after sewing.

Reverse sewing button

Thread cutter button

Raise the presser foot.

Use the thread cutter on the face plate to cut thicker threads.

Thread cutter

BASIC SEWING

• Turning square corners

To sew at the same distance from the edge when turning a corner

with the fabric edge at the 5/8˝ seam guide, stop the machine

when the front edge of the fabric reaches the cornering guide lines

and raise the presser foot. Turn the fabric counterclockwise

90°, lower the presser foot and begin stitching in a new direction.

Cornering guide

Bekijk gratis de handleiding van Bernette b38 Yaya Han Edition, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.