Bernette b38 Yaya Han Edition Handleiding (70 Pagina's)

Handleiding

 27

Adjusting the Needle Thread Tension for a

Zigzag Stitch

In an ideal zigzag stitch, the bobbin thread does not show on the

right side (top) of the fabric, and the needle thread shows slightly

on the wrong side (bottom) of the fabric.

See the illustrations for the correct appearance.

To match this appearance, adjust the needle tension as.

• Correct tension

Right side (top side) of fabric

Wrong side (bottom side) of fabric

Minimize the amount of needle thread visible on the wrong side

(bottom side) of the fabric without causing excessive puckering, or

causing the bobbin thread to show on the right side (top side) of

the fabric.

Results vary with fabric, thread and sewing conditions.

• Tension is too tight

Right side (top side) of fabric

Wrong side (bottom side) of fabric

The corner of each zigzag pulls together on the right side of the

fabric

• Tension is too loose

Right side (top side) of fabric

Wrong side (bottom side) of fabric

The corner of each zigzag point pulls together on the wrong side

of the fabric.

• Tension is too loose

Needle thread (top thread)

Bobbin thread (bottom thread)

To tighten tension

Right side (top side) of fabric

Wrong side (bottom side) of fabric

The needle thread shows through on the wrong side of the fabric,

and the stitch feels bumpy. Turn the dial to a higher tension set-

ting number to tighten the thread tension.

Bekijk gratis de handleiding van Bernette b38 Yaya Han Edition, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.