Bernette b38 Yaya Han Edition Handleiding (70 Pagina's)

Handleiding

 19

• Bobbin Winding

PLEASE NOTE:

Set the slide speed control at its fastest position for bobbin

winding.

Draw the thread from the spool and pass the thread around

the bobbin winding tension disc.

Bobbin winder tension disc

Thread through the hole in the bobbin from the inside to the

outside.

Put the bobbin on the bobbin winder spindle.

Push the bobbin to the right.

The bobbin icon appears on the LCD display.

Bobbin icon

With the free end of the thread held in your hand, start the

machine. Stop the machine when it has wound a few layers,

and then cut the thread close to the hole in the bobbin.

Start the machine. When the bobbin is fully wound, it will stop

automatically. Stop the machine and return the slide speed

control position. Shift the bobbin winder spindle to the left for

stitching. Cut the thread as shown.

PLEASE NOTE:

For safety purposes, the machine will automatically

stop 1.5 minutes after starting bobbin winding.

Remove the bobbin. Cut the thread as shown.

Return the slide speed control position.

Bekijk gratis de handleiding van Bernette b38 Yaya Han Edition, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.