Handleiding
Je bekijkt pagina 50 van 74
50
Scenario B: Working with two computers and two monitors
1. Establish cable connection as instructed in Establishing KVM connections on page 47.
2. Go to System > Power Awake and make sure it is set to ON.
3. Go to KVM Switch > USB and select None. This is because two video inputs are
displayed simultaneously and require no switch. The None option will switch USB
control only.
4. Press the function key (if it has been set as the hot key for KVM Switch) or go to the
KVM Switch menu to switch.
Scenario C: Working with KVM and MST at the same time
1. Connect the computer and two monitors properly and enable MST as instructed in Daisy
chain through DisplayPort Multiple-Stream Transport (MST) (PD2706QN only) on page
51.
2. Make sure the USB-C™ and DP sources are properly connected to the first monitor as
illustrated or as instructed in Establishing KVM connections on page 47.
3. Go to System > Power Awake and make sure it is set to ON.
4. Press the function key (if it has been set as the hot key for Input) or go to the KVM
Switch menu to switch.
Displaying two sources at the same time
(PIP/PBP)(selected models only)
To display two input sources on the screen at the same time, you can go for
Picture-in-Picture (PIP) or Picture-by-Picture (PBP) mode.
MST function works only when the video is input via DP.
(DP)
(USB upstream)
Switched to be DP in control
(The KVM Switch hot key)
(USB-C/
Thunderbolt™)
USB-C/Thunderbolt™ in control
Input 1: USB-C
Input 2: DP + USB Upstream
Switched to be DP in control
(DP MST)
(DP MST)
USB-C in control
Bekijk gratis de handleiding van BenQ PD2730S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BenQ |
| Model | PD2730S |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 6587 MB |
