Handleiding
Je bekijkt pagina 63 van 76
EN / 63
Adding and removing clothes during
standby state
If you want to add or remove clothes to/
from the drying machine after the drying
program has started:
1. Press the Start/Standby button to put
the drying machine in Standby state.
The drying operation stops.
2. Open the loading door while in Standby
state, and close the door after you re-
move or add laundry.
3. Press the Start/Standby button to start
the program.
Adding laundry after the drying op-
eration starts may cause the dried
laundry inside the drying machine
to mix with wet laundry and leave
the laundry damp at the end of op-
eration.
Adding or removing laundry during
drying may be repeated as many
times as you wish. But this opera-
tion continuously interrupts the dry-
ing operation and thus increases
program time and energy consump-
tion. So, it is recommended to add
laundry before the program starts.
If a new program is selected by
turning the program selection but-
ton while the drying machine is in
standby state the running program
terminates.
Do not touch the inner surface of
the drum while adding or removing
clothes during a continuing pro-
gram. The drum surface is hot.
9.10 Cancelling the Program
If you want to cancel the program and ter-
minate the drying operation for any reason
after the drying machine starts running,
turn the On/Off/Program Selection button
after pressing the Start / Standby selection
button; and the program terminates.
The inside of the drying machine
shall be extremely hot when you
cancel the program during machine
operation, so run the refreshing pro-
gram to allow it to cool down.
9.11 End of Program
When the program ends, the LEDs of End/
Wrinkle Prevention and Fiber Filter Cleaning
Warning on the program follow-up indicator
turn on. Loading door can be opened and
drying machine is ready for another opera-
tion.
Turn the On/Off/Program Selection button
to On/Off position in order to turn the dry-
ing machine off.
If the wrinkle prevention mode is
active and the laundry is not re-
moved after the program is com-
pleted, the wrinkle prevention func-
tion activates for 2 hours to prevent
the laundry inside the machine to
get wrinkled. The program turns the
laundry with 10-minute intervals to
prevent them from wrinkling.
9.12 Odour Feature
If your drying machine has odour feature,
read the ProScent user’s manual to use this
feature.
9.13 HomeWhiz Function
Firstly, the homewhiz application should be
installed on your phone.
The detailed information regarding the
homewhiz application is available on ht-
tps://www.homewhiz.com/.
Turn on the bluetooth on your phone.
1. Switch the program selection button to
Off mode.
2. Press the Dryness level and Remote
Control keys together for 3 seconds.
3-2-1 appears on the screen during this
time. Then the image below appears on
the screen.
DE
EN
Bekijk gratis de handleiding van BEKO TR540, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | TR540 |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 7639 MB |
