Handleiding
Je bekijkt pagina 31 van 59
• Prior to the task being carried out, an oil and refrigerant
sample shall be taken in case analysis is required prior to
re-use of reclaimed refrigerant. It is essential that electrical
power is available before the task is commenced.
a) Become familiar with the equipment and its operation.
b) Isolate system electrically.
c) Before attempting the procedure ensure that:
–Mechanical handling equipment is available, if required,
for handling refrigerant cylinders;
–All personal protective equipment is available and being
used correctly;
–The recovery process is supervised at all times by a
competent person;
–Recovery equipment and cylinders conform to the
appropriate standards.
d) Pump down refrigerant system, if possible.
e) If a vacuum is not possible, make a manifold so that
refrigerant can be removed from various parts of the system.
f) Make sure that cylinder is situated on the scales before
recovery takes place.
g) Start the recovery machine and operate in accordance
with manufacturer's instructions.
h) Do not overfill cylinders. (No more than 80 % volume
liquid charge).
I ) Do not exceed the maximum working pressure of the
cylinder, even temporarily.
j ) When the cylinders have been filled correctly and the
process completed, make sure that the cylinders and the
equipment are removed from site promptly and all isolation
valves on the equipment are closed off.
k) Recovered refrigerant shall not be charged into another
refrigeration system unless it has been cleaned and
checked.
15
Bekijk gratis de handleiding van BEKO BSVOL 091, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | BSVOL 091 |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 6111 MB |
