BEKO BMF40B handleiding
Handleiding
Je bekijkt pagina 23 van 96
23
6 Maintenance and cleaning
General cleaning information
General warnings
•
Wait for the appliance to cool down before
cleaning the appliance. Hot surfaces may
cause burns!
• Do not apply the detergents directly on the
hot surfaces. This may cause permanent
stains.
• The appliance should be thoroughly
cleaned and dried after each operation.
Thus, food residues shall be easily cleaned
and these residues shall be prevented from
burning when the appliance is used again
later. Thus, the service life of the appliance
extends and frequently faced problems are
decreased.
• Do not use steam cleaning products for
cleaning.
• Some detergents or cleaning agents
may cause damage to the surface. Do not
use abrasive detergents, cleaning pow-
ders, cleaning creams, descalers or sharp
objects during cleaning.
• No special cleaning agent is required for
cleaning made after each operation.
Clean the appliance using dishwashing
detergent, warm water and a soft cloth
or sponge and dry it with a dry microfiber
cloth.
• Be sure to completely wipe off any remain-
ing liquid after cleaning and immediately
cleanany food splashing around during
cooking.
• Do not wash any component of your appli-
ance in a dishwasher.
Inox - stainless surfaces
• Do not use acid or chlorine-containing
cleaning agents to clean stainless or inox
surfaces and handles.
• Stainless-inox surfaces may change colour
in time. This is normal. After each opera-
tion, clean with a detergent suitable for the
stainless or inox surface.
• Clean with a soft soapy cloth and liquid
(non-scratching) detergent suitable for
inox surfaces, taking care to wipe in one
direction.
• Remove lime, oil, starch,
milk and protein stains on the surfaces im-
mediately without waiting. Stains may rust
in long periods of time.
Enamelled surfaces
• After each use, clean the enamel surfaces
using dishwashing detergent, warm water
and a soft cloth or sponge and wipe with a
dry cloth.
• If your product has an easy steam cleaning
function, you can make easy steam clean-
ing for light non-permanent dirt. (See the
"Easy steam cleaning" section)
• You may use the Quick&Shine cleaning
agents for the oven interiors and grills, used
on enamelled surfaces and recommended
by the authorized service, for persistent
stains. Do not use any other oven cleaner.
• The oven shall be cooled down for cleaning
in the cooking area. Cleaning on hot surfac-
es shall create both fire hazard and
damage the enamel surface.
Catalytic surfaces
• The side walls in the cooking area can only
be covered with enamel or catalytic walls.
It varies by model.
• The catalytic walls have a light matte and
porous surface. The catalytic walls of the
oven shall not be cleaned.
• Catalytic surface absorbs oil thanks to its
porous structure and starts to shine when
the surface is saturated with oil, in this case
it is recommended to replace the parts.
Glass surfaces
• When cleaning glass surfaces, do not use
hard metal scrapers and abrasive clean-
ing materials. They can damage the glass
surface.
• Clean the appliance using dishwashing de-
tergent, warm water and a microfiber cloth
specific for glass surfaces and dry it with a
dry microfiber cloth.
• If there is residual detergent after cleaning,
wipe it with cold water and dry with a clean
and dry microfiber cloth. Residual detergent
may damage the glass surface next time.
• Under no circumstances should the dried-
up residue on the glass surface be
Bekijk gratis de handleiding van BEKO BMF40B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | BMF40B |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10172 MB |
