BEKO BDFS16031W handleiding

52 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 18 van 52
EN / 18
3. Level
16-19 13-15 23-27
Bring the water hardness setting
to position 3 by pressing the Se-
lect key. (P3)
4. Level
20-24 16-19 28-34
Bring the water hardness setting
to position 4 by pressing the Se-
lect key. (P4)
5. Level
25-62 20-50 35-90
Bring the water hardness setting
to position 5 by pressing the Se-
lect key. (P5)
Table1: Water Hardness Level Setting
Table
If the hardness of the water you use is
above 50°dH (French hardness) or if you
use well water, you should use filters and
water purifiers.
If the hardness of the water you use is
below 7°dH, you do not need to use salt
in your dishwasher. In this case, the "Low
Salt Indicator Light" on your dishwasher
control panel will be on continuously.
If your water hardness setting is at level
1, the "Low Salt Indicator Light" will re-
main on continuously even though you
do not need to use salt. If you do add salt
in this position, the salt will not be con-
sumed and the lamp will not come on.
NOTICE!If you move house, you may
need to adjust the water hardness set-
ting of your dishwasher again according
to the water hardness of the place you
move to, taking into account the inform-
ation given above. If the water hardness
setting of your dishwasher has been ad-
justed before, the last water hardness
setting will be displayed on your dish-
washer’s display panel.
6.4 Filling the salt
In order for the machine to operate at the
same performance continuously, the water
softening system needs to be renewed.
Dishwasher salt is used for this purpose.
Use only special softening salt pro-
duced for use in dishwashers.
It is recommended to use granu-
lated or powdered softening salts in
the water softening system. Do not
use table salt, rock salt, etc. that do
not fully dissolve in water. Other-
wise, the performance of the sys-
tem may deteriorate over time.
The salt compartment fills with wa-
ter when you turn the machine on,
so fill the salt compartment before
starting the machine.
1. To add softening salt, first remove the
lower basket.
2. Open the salt compartment cover by
turning it counterclockwise (A).
3. Add 1 litre of water to the salt compart-
ment only when using your machine for
the first time.
4. Fill the salt container with salt (D). Stir
with a spoon to speed up the dissolu-
tion of the salt in the water.

Bekijk gratis de handleiding van BEKO BDFS16031W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkBEKO
ModelBDFS16031W
CategorieVaatwasser
TaalNederlands
Grootte6429 MB