BEKO BDFS16030W handleiding
Handleiding
Je bekijkt pagina 37 van 52
EN / 37
Programming the Washing Period
Delaying
If economy billing schedule is applied for
power in your region, you may use the delay
function to wash your dishes at the relevant
times. You may delay the start time of the
cycle you have selected up to 3-6-9 hours.
The delay adjustment cannot be made after
the cycle has started.
1.Press the delay key after selecting the
washing programme and any other addi-
tional functions.
2.Enter delay selection mode. 3-hour delay
icon flashes on the screen.
3.When you press the key for the second
time, 3 hours icon turns off, and 6-hour
delay icon flashes and activates. When you
press the key for the third time, 6-hour icon
turns off, and 9-hour delay icon flashes and
activates.
4.Run the delay by pressing Start / Hold
key.
While the delay function is running,
the relevant delay duration and
start icon are constantly on. During
0-3 hours delay period, 3-hour delay
icon; during 3-6 hours delay period,
6-hour delay icon; and during 6-9
hours delay period, 9-hour delay
icon is on.
If the door is opened while delay is
running, the countdown is stopped
and the start icon starts flashing.
For exiting the delay mode without
running the delay, press the delay
key until 3-6-9 duration indicators
turn off. Exit the delay mode and
enter the program selection mode
Changing the settings while the delay
function is active
While the delay function is active, you can-
not make changes to the washing cycle, ad-
ditional functions or to the delay period
To cancel the delay function
1.Press and hold Start / Hold / Cancel key
for 3 seconds; delay period and start-hold
icon turns off and the delay function is can-
celled.
You can select and run a new cycle
after cancelling the delay function.
The delay function cannot be set
after the cycle has started.
7.3 Starting the Cycle
Press the Start / Hold / Cancel key to start
your dishwasher after selecting the cycle
and additional functions.
Dishwasher softens the water as
per the hardness of the mains wa-
ter. The washing period may differ
due to the water softening process.
Moreover, program period may also
change while the program is being
executed as a result of the room
temperature, mains water temper-
ature and the amount of dishes.
Care to avoid opening of the door
while the dishwasher is being oper-
ated. If you need to open the door,
stop the dishwasher by pressing
the Start / Hold / Cancel key. Then
open the door of the dishwasher.
Be careful as steam may come out
when you open the dishwasher’s
door. Press the Start / Hold / Can-
cel key again after closing the dish-
washer door. Cycle shall be re-
sumed.
After rinsing, the dishwasher will be
quiet for a while in pause mode
then will proceed to the drying step
to drain all the water left on the
dishes and inside the dishwasher
and to clean the water softener.
a
Bekijk gratis de handleiding van BEKO BDFS16030W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | BDFS16030W |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 6224 MB |
