BEKO BDFN36540PA handleiding
Handleiding
Je bekijkt pagina 18 van 52
EN / 18
Level 3
16-19 13-15 23-27
Press the selection button to set
the water hardness setting to pos-
ition 3. (r3)
Level 4
20-24 16-19 28-34
Press the selection button to set
the water hardness setting to pos-
ition 4. (r4)
Level 5
25-62 20-50 35-90
Press the selection button to set
the water hardness setting to pos-
ition 5. (r5)
Table1: Water Hardness Level Adjustment
Table
Mechanical Water Hardness Adjustment
The glass care function setting is used to
adjust the water hardness level of the pre-
softened wash water in the dishwasher.
The setting should be made according to
the water hardness setting level. The ad-
justment is made with a wide and flat
screwdriver. The screwdriver is used to turn
the Mechanical glass care setting switch.
Simply turn the Mechanical switch to the
same position as the water hardness set-
ting level.
For example
For water hardness level “r3”, set the Mech-
anical Glass Care setting switch to position
3
For water hardness level "r4", set the Mech-
anical Glass Care setting switch to position
4
Make the same hardness level that you set
on the control panel with the regeneration
setting switch. For example, if the setting
you made on the control panel is 3, set the
regeneration setting switch to 3 as well.
• If the hardness of the water you use is
above 50° dH (French hardness) or if you
use well water, it is recommended that
you use filters and water purification
devices.
• If the hardness of the water you use is
below 7°dH, you do not need to use salt
in your dishwasher. In this case, the "Salt
Deficiency Warning Indicator" on the con-
trol panel of your machine will be con-
stantly lit.
• If your water hardness setting is at level
1, the “Salt Deficiency Warning Indicator”
will remain on continuously even though
you do not need to use salt. If you use
salt in this position, salt will not be con-
sumed and the lamp will not light up.
NOTICE!In case of moving, you need to
re-adjust the water hardness setting of
your machine according to the water
hardness of the place you are moving to,
taking into account the information
given above. If the water hardness set-
ting has been made in your machine be-
fore, the last water hardness setting will
be shown on your machine's screen.
6.4 Filling the salt
The water softening system must be re-
newed in order for the dishwasher to oper-
ate at the same performance at all times.
Dishwasher salt is used for this purpose.
Only use special softening salt for
use in dishwashers.
Bekijk gratis de handleiding van BEKO BDFN36540PA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | BDFN36540PA |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 5959 MB |
