BEKO BDFN36540PA handleiding
Handleiding
Je bekijkt pagina 17 van 52
EN / 17
Setting the water softening system
Washing efficiency will be improved when
the water softening system is set correctly.
Read the section on adjusting the water
softening system first.
Regeneration of the water softening sys-
tem can take place in all cycles during the
drying step. When regeneration is per-
formed, the duration of the cycle, energy
and water consumption are increased. For
the regeneration process, the table below
shows the frequency of the regeneration
process, maximum additional time, water
and energy consumption depending on the
water consumption for the Eco 50 °C cycle
when the dishwasher is operated under
standard conditions with a water supply of
14 dH.
Eco 50 °C
water consumption (l)
renew after .... cycle Additional time (min)
Additional water con-
sumption (l)
Additional energy
consumption (kWh)
12.3-14.7 5 5 3.0 0.05
9.6-12.2 6 5 3.0 0.05
9.0-9.5 7 5 3.0 0.05
8.0-9.0 8 5 3.0 0.05
7.0-7.9 9 5 3.0 0.05
For water consumption in the Eco 50 °C
cycle of your dishwasher, refer to the Cycle
Information and Average Consumption Val-
ues Table given in the Cycle Table.
6.3 Adjusting the Water Softening
System
When the water softening system is adjus-
ted correctly, the washing, rinsing and dry-
ing performance of your dishwasher will in-
crease.
NOTICE!To adjust the system, first learn
your water hardness level from the au-
thorized service in your area and adjust
it as follows.
After determining the water hardness:
1 With the door closed, turn on your ma-
chine with the On/Off button and enter the
Sub-Menu by pressing the On/Off and P2
program buttons simultaneously for 3
seconds.
2. Press the P2 program key to move to the
“r” position on the screen.
3. Set to the appropriate level by selecting
one of the “r:1”, “r:2”, “r:3”, “r:4” or “r:5” posi-
tions with the P3 program key.
4.Exit the settings menu by pressing the
On/Off button for 3 seconds. Your settings
will be saved automatically.
Hardness Level
English Hardness
°dE
German Hardness
°dH
French* Hardness
°dF
Water Hardness Level Indicator
Level 0
0-5 0-4 0-8
Press the selection button to set
the water hardness setting to pos-
ition 1. (r1)
Level 1
6-9 5-7 9-13
Press the selection button to set
the water hardness setting to pos-
ition 1. (r1)
Level 2
10-15 8-12 14-22
Press the selection button to set
the water hardness setting to pos-
ition 2. (r2)
Bekijk gratis de handleiding van BEKO BDFN36540PA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | BEKO |
| Model | BDFN36540PA |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 5959 MB |
