Behringer RD-78 handleiding
Handleiding
Je bekijkt pagina 9 van 46
16 17Quick Start GuideRD-78
RD-78 Controls
(EN)
Step 2: Controls
TOP PANEL
1. SYNC IN – use this 3.5 mm TRS jack socket to synchronize the
RD-78 to an external analog clock.
2. SYNC OUT – use this 3.5 mm TRS jack socket to synchronize
external analog devices to the RD-78’s clock.
3. PHONES – use this 3.5 mm TRS jack socket to monitor the
RD-78’s output with a suitable pair of stereo headphones.
4- 13. LEVEL CONTROLS – use these controls to set the levels of
the RD-78’s voices:
4. Bass Drum
5. Snare Drum
6. Clap & Rimshot
7. Cymbal & Hi hat
8. Metallic Beat
9. Maracas
10. Tambourine
11. Guiro
12. Clave & Cowbell
13. Conga & Bongos
14. ACCENT – use this control to adjust the level of the accents
(where programmed).
15. BALANCE – use this control to set a balance on the main
output between the lower pitched sounds and the higher.
Turning the control CCW emphasizes lower sounds,
CW emphasizes higher ones.
16. TEMPO – use this control to set the tempo of the RD-78’s
internal clock. Range is 40 bpm to 300 bpm.
17. VARIATION – use this switch to set the frequency of
variations (see also control 21). Range is 2, 4, 8, 12 or 16 bars.
18. TRACK/INSTRUMENT – use this switch to select the track
to be played or recorded, or to select the instrument to be
programmed in Pattern Record mode.
19. INSTRUMENT SELECT – use these four switches to select
alternative instruments for programming:
• Clave or Tambourine
• High Bongo or Guiro
• Low Bongo or Metallic Beat
• Low Conga or Cowbell
20. TRACK/PATTERN – use this switch to select what mode the
RD-78 is in:
• Rhythm: playing one of the sixteen preset patterns.
• Track Write: creating a track from programmed patterns.
• Track Play: playing back a track that has already
been created.
• Pattern Play: playing back a pattern that has already
been created.
• Pattern Write: programming a pattern using the
available instruments.
21. VARIATION – use this switch to select the type of variation
to be used:
• O (no variation).
• Rhythm – plays rhythm B if A is running, and vice versa.
• Break – plays a silent bar.
• Fill-In 1 – 7 (seven pre-programmed lls).
• Rolling High Bongo.
• Rolling Snare Drum.
22. FADE IN – use this switch to select a fade-in time at the start
of a track: o, short (8 steps) or long (48 steps).
23. FADE OUT – use this switch to select a fade-out time at the
end of a track: o, short (8 steps) or long (32 steps).
24. VOLUME – use this control to set the master output level of
the RD-78, for the phones output (3) and mix output (58).
25. CLEAR/MANUAL/RESET/DC – this button has multiple
functions, depending on which mode the RD-78 is in:
• In pattern write use this switch to clear a pattern of all
programmed steps.
• In preset or pattern play mode use this button to manually
insert a variation (according to the setting of switch 28).
• When this button and Start/Stop (button 29) are pressed
together in pattern write mode a random pattern will
be created.
• In track write mode this button sets the bar to the rst
position, and is used to mark the nal bar (Da Capo)
26. SCALE – use this switch to select the scale that a pattern will
be programmed or played in:
• ⁄ time.
• ⁄ time.
• ¾ time
• ⁄ time
27. PATTERN/GROUP – use this button to switch between A
and B variants of a preset or programmed rhythm. The LEDs
indicate which is in use.
Press and hold Pattern/Group and Write/Next (button 47) to
select the synchronization source using buttons 31 – 38.
28. VARIATION – use this switch to select whether pattern
variations will be inserted automatically according to the
setting of switches 17 and 21; or will be inserted manually by
pressing button 25.
29. START/STOP – use this button to start and stop playback of
the RD-78 when using the internal clock.
30. FUNCTION/CANCEL – use this button to access alternative
functions on some buttons; and to mute selected instruments
when playing the preset patterns, in conjunction with
buttons 31 – 46. The LED above the button lights when the
button is in use.
Buttons 31 – 46 have dierent functions according to which
mode the RD-78 is in:
PATTERN PLAY
Use the buttons to select a pattern from 1 – 16.
MUTE
While the RD-78 is playing individual voices can be muted by
pressing and holding the FUNCTION button (30) and pressing the
relevant button 31 – 46 to mute the associated voice. Repeating
the action will undo the muting.
PATTERN WRITE
Use the buttons to insert an instrument on a desired step from
1 – 16 (dependent on the number of steps in the pattern).
To select the last step of the pattern hold FUNCTION button 30 and
press the button for the last required step.
Bekijk gratis de handleiding van Behringer RD-78, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Behringer |
| Model | RD-78 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6753 MB |
