Bauknecht WAT Prime 6 L3 handleiding
Handleiding
Je bekijkt pagina 8 van 8
TROUBLESHOOTING
The washing machine may not function properly at times for specic reasons. Before contacting customer service, please check if the problem can
be solved with the aid of the following list.
XXXXX
Faults: Possible reasons/solutions:
The washing machine does not turn on
and/or the programme does not start
• The machine is not plugged to the mains, or the plug has not been correctly inserted into the
socket.
• There has been a power cut.
• The lid is not properly closed.
The washing cycle does not start.
• The "Start/Pause" button has not been pressed.
• The tap is not open.
• “Delay Start” has been set.
The appliance is stuck in the middle of a
programme and the "Start/Pause" light
is ashing
• The "Hydrostop" option has been activated (if available).
• Programme has been changed - select the programme you want again and press the "Start/
Pause" button.
The appliance is vibrating
• The washing machine is uneven.
• The transport bracket has not been removed. Before commissioning the washing machine, the
transport bracket must be removed.
The spin results are bad. The laundry is
still very wet. The “Spin” icon is ashing,
or the spin speed on the display is
ashing, or the spin speed icon is
ashing at the end of the programme
- depending on the model
• An unbalanced laundry load during spinning has delayed the spin phase in order to avoid
damage to the washing machine. The laundry is therefore still very wet. The reason for the
imbalance may be: small laundry loads (consisting of only a few moderately large or absorbent
objects, such as towels) or large/heavy pieces of laundry.
• If possible, avoid small laundry loads.
• The "Spin" button is set to a low speed.
"Service" icon lights up
• Switch the machine o, unplug it and wait for about 1 minute before plugging it back in.
• Should the problem continue, call the customer service.
"Pump" icon lights up
• The water has not been pumped out of the washing machine.
• Clean the water lter.
"No water" icon lights up • The appliance has no water supply, or an insucient water supply.
All lights on the washing phase
display light up
• Drum tabs open.
• The appliance is stuck in the middle of the programme. The drum tabs were not closed properly.
Hold down the “Delete” button for at least 3 seconds and wait until the “Door unlocked” light is
lit. Open the lid and close the drum tabs, select the desired programme and restart it. If the fault
persists, contact our customer service.
You can download the safety information, technical and energy data as follows:
• Visiting the website http://docs.bauknecht.eu and parts-selfservice.bauknecht.com
• Use the QR code
• Alternatively, contact our customer service (See telephone number in the warranty book). If you contact our
customer service, please state the codes on the product plate.
For repair and maintenance information, please visit www.bauknecht.com
The QR code on the label with the energy class information can be used to search for model information. The label
also contains the model identier, which can be used in the product database portal at https://eprel.ec.europa.eu
for any queries.
400011721025
Bekijk gratis de handleiding van Bauknecht WAT Prime 6 L3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bauknecht |
| Model | WAT Prime 6 L3 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 1428 MB |
