Handleiding
Je bekijkt pagina 4 van 10
THANK YOU FOR BUYING A BAUKNECHT PRODUCT.
In order to receive a more complete assistance,
pleaseregister your product on
www.register10.eu
Policies, standard documentation, ordering of spare parts and additional product information can be found by:
• Using QR code in your appliance
• Visiting our website docs.bauknecht.eu and parts-selfservice.europeanappliances.com
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-sales
Service, please state the codes provided on your product's identi cation plate.
You can nd more information about your model online at https://eprel.ec.europa.eu/ which is the o cial EU EPREL product database.
After selecting the Product Category, enter the Model Identi er of the product. The Model Identi er is made up of letters and numbers
and can be found on the identi cation plate, as Mod. (see image on the right).
EN
Before using the appliance carefully
read the Safety Instruction.
PLEASE SCAN THE QR CODE ON YOUR APPLIANCE IN ORDER TO REACH MORE INFORMATION.
Quick guide
Before using the appliance carefully
read the Safety Instruction.
TROUBLESHOOTING EN
Before contacting the After-sales Service, refer to the table below. Often the malfunctions are minor and can be solved in few minutes.
Spare parts will be available for a period of up to 10 years, according to the speci c Regulation requirements.
Malfunction
Possible cause
Solution
The drying
times are very
long.
An appropriate maintenance was not carried out.
Refer to the Cleaning & Maintenance section and perform the
operations described.
The garments are too wet.
Carry out a washing cycle with higher spin speed to remove as much
water as possible.
Room temperature.
The drying time may be longer if the room temperature falls outside
the 14–30°C range.
The programme, the time and/or the drying level
set are not suitable for the type and the amount
of load inserted into the dryer.
Refer to Programmes and Options sections to nd the programme
and options most suitable for the type of load.
The dryer may be overloaded.
Refer to the Programmes section to check the max load for each
programme.
The tumble
dryer does not
turn on.
The "On/O " button was not pressed.
Press the "On/O " button.
The plug is not inserted into the socket.
Insert the plug into the socket.
The socket is faulty.
Try to plug another appliance in the same socket. Do not use
connecting electrical devices to the socket, such as adapters or
extensions.
A power failure occurred.
Wait for the power supply to be restored and switch the fuse on again
if necessary.
The tumble
dryer does not
start.
The door has not been closed properly.
Close the door.
A time delay was set to the start of the cycle.
For machines equipped with this function: wait for the set delay to
end or switch the machine o to reset it. Refer to the Options section.
The "Start/Pause" button was not pressed. Press the "Start/Pause" button.
The Key Lock function was enabled (for machines
equipped with this option).
If Key Lock was selected, disable it. Switching the machine o will not
disable this option. Refer to the Options section.
Garments are
wet at cycle
completion.
Small load.
The automatic programme has not sensed the required nal moisture
so that the dryer completes the programme and stops. If this happens
simply select an additional short period of drying or select Extra Dry
option if available.
Large loads or heavier fabrics.
Dryness levels can be modi ed to the speci c dryness desired.
Extra Dry is recommended for ready to wear items.
The drying cycle was paused and then not
reactivated within 15 minutes, causing the
machine to shut down.
The drying cycle has to be set up once more and restarted.
A power failure might have occurred, causing the
machine to shut down.
The drying cycle has to be set up once more and restarted.
Lights on or ashing
Water tank
The water tank is full. Empty the water tank. Refer to the Cleaning & Maintenance section.
Door lter
Failure of the air ow necessary for machine
operation.
Clean the door lter and check whether air intake is free. Carrying out
these operations improperly may cause damages. Refer to Cleaning &
Maintenance section.
Bottom lter*
The bottom lter requires cleaning. Clean the bottom lter. Refer to Cleaning & Maintenance section.
The presence
of wrench
symbol signals a
malfunction.
The machine sensors have detected a failure, one
of the following error codes may appear on the
display:
F1 E1 ; F1 E2 ; F1 E3 ; F2 E1 ; F3 E1 ; F3 E3 ; F3 E4 ;
F4 E1 ; F4 E2 ; F4 E7 ; F5 E1 ; F6 E1 ; F6 E2 ; F6 E3 .
Switch the dryer o and unplug it. Open the door immediately and
pull laundry out, to allow the heat to dissipate. Wait for about 15
minutes. Reconnect the dryer to the power supply, load the laundry
and restart the drying cycle. If the problem still occurs, contact
the After-Sales Service Centre and communicate the letters and
digits ashing on the display.
*Note: some models are auto-cleaning and not equipped with bottom lter. Please refer to the Cleaning & Maintenance section.
Bekijk gratis de handleiding van Bauknecht T Pure M11 82, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bauknecht |
| Model | T Pure M11 82 |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 2063 MB |