Handleiding
Je bekijkt pagina 3 van 27
INSERTING THE WIRE SHELF AND OTHER
ACCESSORIES
Insert the wire shelf horizontally by sliding it across
the shelf guides, making sure that the side with the
raised edge is facing upwards.
Other accessories, such as the drip tray and the
baking tray, are inserted horizontally in the same way
as the wire shelf.
REMOVING AND REFITTING THE SHELF GUIDES
• To remove the shelf guides, remove the fixing screws
(if present) on both sides with the aid of a coin.
Lift the guides up and pull the lower parts out of their
seatings: the shelf guides can now be removed.
• To refit the shelf guides, first fit them back into their
upper seating. Keeping them held up, side them into
the cooking compartment, then lower them into
position in the lower seating.
The left (“L”) and right (“R”)
shelf guides can be recognized
by the logo indicated in this
picture.
FITTING THE SLIDING RUNNERS
Remove the shelf guides
from the oven and remove
the protective plastic from
the sliding runners.
Fasten the upper clip of the
runner to the shelf guide
and slide it along as far as it
will go. Lower the other clip
into position.
To secure the guide, press
the lower portion of the clip
firmly against the shelf
guide. Make sure that the
runners can move freely.
Repeat these steps on the
other shelf guide on the
same level.
Please note: The sliding runners can be tted on any level.
RL
Bekijk gratis de handleiding van Bauknecht BBI11P8FHT2SK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bauknecht |
| Model | BBI11P8FHT2SK |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 3831 MB |
