Baofeng UV-82X3 handleiding
Handleiding
Je bekijkt pagina 25 van 103
18 Visit Radioddity.com for Downloads and Help
scanning) and remain there until the signal goes away; it will then switch back to broadcast FM.
Press and hold [F] to activate the alarm function. Press [F] (a short press) again to turn it off.
To send out a tone (more details in the section called “Tone-burst”.) Press the [F] key while
holding down the PTT.
Side key 2 / [M]
Press [M] momentarily to turn on the LED flashlight. Another momentary press will flash the
LED. Another momentary press turns the flashlight off.
Press and h
old [M] to monitor the signal. This will open up the squelch so you can listen to the
unfiltered signal.
VFO / MR – How to Switch
To switch your radio to Frequency (VFO) mode; you turn the radio OFF, then Press and Hold
button while powering ON.
To save frequencies to channel memory you must be in Frequency (VFO) mode.
UV-82X3
Bekijk gratis de handleiding van Baofeng UV-82X3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baofeng |
| Model | UV-82X3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16051 MB |
