Baofeng UV-82X3 handleiding
Handleiding
Je bekijkt pagina 24 van 103
Visit Radioddity.com for Downloads and Help 17
Even though it is a s even character by two-line display, channel memories are only
configurable to six character names.
Battery Level Indicator
When the battery level indicator reads the battery is depleted. At this point the radio will start
beeping periodically as well as flash the backlight of the display and when voice prompts are
enabled, a "Low Voltage" announcement will be heard, indicating that you need to change your
battery or put your radio in the charger.
To get a
n Accurate Voltage reading you Press and Hold button (for about 2 seconds), the
display will show the current voltage capacity of the battery
Status LED
The status LED has a very simple and traditional design. When you receive a signal it turns
green, when you transmit it turns red, and it's off in standby.
Side key 1 / [F]
Press [F] momentarily to start the broadcast FM receiver. Another momentary press turns the
broadcast FM receiver off. If a signal is received on the active frequency or channel while you
are listening to the broadcast FM, the receiver will open squelch to that frequency (as if
Bekijk gratis de handleiding van Baofeng UV-82X3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baofeng |
| Model | UV-82X3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16051 MB |
