Baofeng UV-7B handleiding
Handleiding
Je bekijkt pagina 25 van 37
(15) Dual Watch Operation (Dual Watch) – MENU + 15
When this function is activated, you can receive the frequency of channel A and channel B at the same time.
If a signal is detected, the or pointer will blink on the corresponding channel or frequency.
Note: In Dual Watch operation mode, the 'D' icon will be displayed on the top line of the screen, you can freely change the parameters of AB
channel or frequency.
(16) Au
to Keypad Lock (AutoLock) – MENU + 16
When this feature is activated, the keypad will be automatically locked after 10s; this prevents accidental pressure of any keys.
The keypad lock can be manually activated/deactivated through the keypad: keep pressed
.
(17) Alarm Mode (Alarm Mode) – MENU + 17
This function can set the tone alarm/code alarm/site alarm of the radio.
Keep pressed the
key for 3 seconds to start the alarm tone.
The following three options can be selected:
• Site: the speaker emits an alarm tone but the radio doesn’t transmit;
• Tone: the speaker emits an alarm tone and the radio transmits it;
• Code: the speaker emits an alarm tone and the radio transmits it followed by ANI-ID code.
(18) Local Alarm Tone (Alarm Tone) – MENU + 18
Whether to emit an alarm whistle locally when the emerg
ency alarm function is triggered.
(19) ANI-ID (ANI-ID) – MENU + 19
Displays the ANI code set by the software. Manual changes are allowed if necessary, and you can edit up to 5 digits.
ANI-ID is sent when alarm is active and menu 16 = SEND CODE.
The ANI-ID will be sent during DTMF signaling calls.
(20) DTMFST (DTMFST) – MENU + 20
Determines when DTMF Side Tones can be heard from the transceiver speaker. You can choose amongst four options:
•
Off: No DTMF Side Tones are heard and DTMF optional signaling is turned off.
• DT-ST : Side Tones are heard only from manually keyed DTMF codes.
• ANI-ST: Side Tones are heard only from automatically keyed DTMF codes.
• DT+ANI: All DTMF Side Tones are heard.
(21) PTT-ID (PTT-ID) – MENU + 21
When to Send PTT-ID Codes are sent during either the beginning or ending of a transmission.
With this function you can decide when sending the ANI-ID
code in tx mode.
You can choose amongst 4 possibilities.
Bekijk gratis de handleiding van Baofeng UV-7B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Baofeng |
| Model | UV-7B |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3919 MB |
