Baofeng UV-7B handleiding

Niet gecategoriseerd

Baofeng

37 pagina's

PDF beschikbaar

Handleiding

When receiving a call, the green LED is on.

NOTE: To ensure the best reception volume, keep the distance between the microphone and the mouth at the time of transmission from 2.5 cm to

5 cm.

5.9 Emergency Alert

The Emergency Alert feature can be used to signal members in your group for help.

To activate the emergency alert function, press and hold the

key for 3 seconds. The radio will send out a loud siren sound and the flashlight will flash.

Press the

key to exit the emergency alert function.

WARNING: The Emergency Alert feature should only be used in the even of an actual emergency.

5.10 Using the Flashlight

If you press key, the radio turns on the high-intensity LED flashlight on your radio.

• Your radio operates normally when the emergency strobe is activated.

(1) Press

key once, it will turn on continuously (Always On mode).

(2) And then, press

key once, the Strobe Light emits the emergency signal (Strobe emergency mode).

(3) And then, press

key once, the light will be turned off.

5.11 FM Radio (FM)

The frequency ranges to listen to the radio is 65-108MHz. When listening to broadcast FM, press key switches between 65-75 MHz and 76-108 MHz

band.

(1) In frequency or channel mode, Press [SK2] key to turn on the radio.

(2) Select the desired radio frequency with the  or  keys or input the frequency. Or

• Press

to automatically search a radio station.

(3) Press [SK2] key to exit FM radio.

Note: while you are listening to the radio, the frequency or channel of A / B receiving signal will automatically switch to the frequency or channel

mode for normal transmitting and receiving.

When the signal disappears the radio will automatically switch again to FM radio mode.

5.12 Monitor

In standby, press and hold the [SK2] key to enter Monitor. When receiving matched carrier but the signaling or the signal is too weak, this function allows

monitor the weak signal.

Stop pressing the [SK2] key to turn off the speakers and return to standby mode.

» If no signal, it will emit noise when press the [SK2] Key.

Bekijk gratis de handleiding van Baofeng UV-7B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.